+- QB64 Phoenix Edition (https://staging.qb64phoenix.com)
+-- Forum: Chatting and Socializing (https://staging.qb64phoenix.com/forumdisplay.php?fid=11)
+--- Forum: General Discussion (https://staging.qb64phoenix.com/forumdisplay.php?fid=2)
+--- Thread: Pascal's Triangle and nth roots. (/showthread.php?tid=918)
Pascal's Triangle and nth roots. - Pete - 09-25-2022
So to finish off my nth root calculator with long division, I needed to incorporate Pascal's Triangle in the binominal expansion algorithm.
Code: (Select All)
DIM AS DOUBLE i, j, r, z
INPUT "root: "; r
FOR i = 1 TO r + 1
z = 1
FOR j = 1 TO i
PRINT z;
z = z * (i - j) \ j
NEXT
PRINT
NEXTWORKING MODEL FOR NON-DECIMAL ROOTS. NOTE: NO DECIMAL POINT YET in output. I will be adding that later...
Code: (Select All)
$CONSOLE:ONLY
LINE INPUT "Whole number: "; n$
LINE INPUT "Root: "; r$
r = VAL(r$)
nu&& = INSTR(n$, ".") - 1: IF nu&& < 0 THEN nu&& = LEN(n$)
h&& = (r - (r - nu&& MOD r)) + 1
t$ = MID$(n$, 1, h&& - 1): d$ = "0"
limit&& = 16
' Calculate Pascal's Triangle.
REDIM p$(r + 1)
FOR i1&& = 1 TO r + 1
p&& = 1
FOR j1&& = 1 TO i1&&
p$(j1&&) = LTRIM$(STR$(p&&))
p&& = p&& * (i1&& - j1&&) \ j1&&
NEXT
NEXT
DO
oldx$ = "0"
lcnt&& = lcnt&& + 1
FOR j = 1 TO 10
x$ = "0"
FOR i&& = 1 TO r
REM PRINT "(10 ^"; (i&& - 1); "*"; p$(i&&); "* d ^"; i&& - 1; " * j ^"; (r + 1 - i&&); ") + ";
REM x = x + 10 ^ (i&& - 1) * VAL(p$(i&&)) * d ^ (i&& - 1) * j ^ (r + 1 - i&&)
tmp$ = "1"
FOR k% = 1 TO i&& - 1
tmp$ = sm_mult$(tmp$, "10")
NEXT
tmp$ = sm_mult$(tmp$, p$(i&&))
tmp2$ = "1"
FOR k% = 1 TO i&& - 1
tmp2$ = sm_mult$(tmp2$, d$)
NEXT
IF d$ = "0" AND k% = 1 THEN tmp2$ = "1" ' zero^0 = 1
tmp3$ = sm_mult$(tmp$, tmp2$)
tmp$ = "1"
FOR k% = 1 TO r + 1 - i&&
tmp$ = sm_mult$(tmp$, LTRIM$(STR$(j)))
NEXT
tmp2$ = sm_mult$(tmp3$, tmp$)
x$ = sm_add(x$, tmp2$)
NEXT
IF LEN(x$) > LEN(t$) OR LEN(x$) = LEN(t$) AND x$ > t$ THEN EXIT FOR
oldx$ = x$
NEXT
d$ = d$ + LTRIM$(STR$(j - 1))
IF LEFT$(d$, 1) = "0" THEN d$ = MID$(d$, 2) ' Remove leading zero.
tmp1$ = sm_sub$(t$, oldx$)
tmp2$ = MID$(n$, h&&, r) + STRING$(r - LEN(MID$(n$, h&&, r)), "0")
t$ = tmp1$ + tmp2$
IF LEFT$(t$, 1) = "0" THEN t$ = MID$(t$, 2) 'Remove leading zero.
h&& = h&& + r
IF t$ = STRING$(LEN(t$), "0") AND h&& >= LEN(n$) OR lcnt&& = limit&& THEN EXIT DO
LOOP
sm_rt$ = d$
PRINT "Answer: "; sm_rt$: PRINT
RUN
SUB sm_greater_lesser (stringmatha$, stringmathb$, gl%)
compa$ = stringmatha$: compb$ = stringmathb$ ' So original variables do not get changed.
DO
WHILE -1 ' Falx loop.
IF gl% = 2 THEN EXIT WHILE ' For bypassing sign and decimal adjustments when only positive non-decimal numbers are being evaluated.
' Remove trailing zeros after a decimal point.
IF INSTR(compa$, ".") THEN
DO UNTIL RIGHT$(compa$, 1) <> "0" AND RIGHT$(compa$, 1) <> "." AND RIGHT$(compa$, 1) <> "-"
compa$ = MID$(compa$, 1, LEN(compa$) - 1)
LOOP
END IF
IF INSTR(compb$, ".") THEN
DO UNTIL RIGHT$(compb$, 1) <> "0" AND RIGHT$(compb$, 1) <> "." AND RIGHT$(compb$, 1) <> "-"
compb$ = MID$(compb$, 1, LEN(compb$) - 1)
LOOP
END IF
IF MID$(compa$, 1, 2) = "-0" OR compa$ = "" OR compa$ = "-" THEN compa$ = "0"
IF MID$(compb$, 1, 2) = "-0" OR compb$ = "" OR compb$ = "-" THEN compb$ = "0"
' A - and +
j% = 0: k% = 0
IF LEFT$(compa$, 1) = "-" THEN j% = -1
IF LEFT$(compb$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
j&& = INSTR(compa$, ".")
k&& = INSTR(compb$, ".")
' A starting decimal and non-decimal.
IF j&& = 0 AND k&& = 1 THEN
IF compa$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k&& = 0 AND j&& = 1 THEN
IF compb$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' remove decimals and align.
j2&& = 0: k2&& = 0
IF j&& <> 0 OR k&& <> 0 THEN
IF j&& THEN compa$ = MID$(compa$, 1, INSTR(compa$, ".") - 1) + MID$(compa$, INSTR(compa$, ".") + 1): j2&& = LEN(compa$) - j&& + 1
IF k&& THEN compb$ = MID$(compb$, 1, INSTR(compb$, ".") - 1) + MID$(compb$, INSTR(compb$, ".") + 1): k2&& = LEN(compb$) - k&& + 1
compa$ = compa$ + STRING$(k2&& - j2&&, "0")
compb$ = compb$ + STRING$(j2&& - k2&&, "0")
END IF
EXIT WHILE
WEND
' Remove leading zeros if any.
DO UNTIL LEFT$(compa$, 1) <> "0"
compa$ = MID$(compa$, 2)
LOOP
IF compa$ = "" THEN compa$ = "0"
DO UNTIL LEFT$(compb$, 1) <> "0"
compb$ = MID$(compb$, 2)
LOOP
IF compb$ = "" THEN compb$ = "0"
' Both positive or both negative whole numbers.
SELECT CASE LEN(compa$)
CASE IS < LEN(compb$)
gl% = -1
CASE IS = LEN(compb$)
IF compa$ = compb$ THEN
gl% = 0
ELSEIF compa$ > compb$ THEN gl% = 1
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
CASE IS > LEN(compb$)
gl% = 1
END SELECT
EXIT DO
LOOP
END SUB
SUB sm_add_subtract_router (stringmatha$, operator$, stringmathb$, runningtotal$)
DIM AS _INTEGER64 a, c, s
a1$ = stringmatha$: b1$ = stringmathb$
s = 18: i&& = 0: c = 0
a$ = stringmatha$: b$ = stringmathb$: op$ = operator$
IF op$ = "-" THEN
IF LEFT$(b$, 1) = "-" THEN b$ = MID$(b$, 2) ELSE b$ = "-" + b$
END IF
IF INSTR(a$, ".") <> 0 OR INSTR(b$, ".") <> 0 THEN
decimal% = -1
IF INSTR(a$, ".") <> 0 THEN
dec_a&& = LEN(MID$(a$, INSTR(a$, ".") + 1))
a$ = MID$(a$, 1, INSTR(a$, ".") - 1) + MID$(a$, INSTR(a$, ".") + 1)
END IF
IF INSTR(b$, ".") <> 0 THEN
dec_b&& = LEN(MID$(b$, INSTR(b$, ".") + 1))
b$ = MID$(b$, 1, INSTR(b$, ".") - 1) + MID$(b$, INSTR(b$, ".") + 1)
END IF
' Line up decimal places by inserting trailing zeros.
IF dec_b&& > dec_a&& THEN
j&& = dec_b&&
a$ = a$ + STRING$(dec_b&& - dec_a&&, "0")
ELSE
j&& = dec_a&&
b$ = b$ + STRING$(dec_a&& - dec_b&&, "0")
END IF
END IF
IF LEFT$(a$, 1) = "-" OR LEFT$(b$, 1) = "-" THEN
IF LEFT$(a$, 1) = "-" AND LEFT$(b$, 1) = "-" THEN
sign$ = "": a$ = MID$(a$, 2): b$ = MID$(b$, 2)
ELSE
IF LEFT$(a$, 1) = "-" THEN a$ = MID$(a$, 2): sign_a$ = "-"
IF LEFT$(b$, 1) = "-" THEN b$ = MID$(b$, 2): sign_b$ = "-"
IF LEFT$(a1$, 1) = "-" THEN a1_x$ = MID$(a1$, 2) ELSE a1_x$ = a1$
IF LEFT$(b1$, 1) = "-" THEN b1_x$ = MID$(b1$, 2) ELSE b1_x$ = b1$
sm_greater_lesser a1_x$, b1_x$, gl%
IF gl% < 0 THEN
IF LEN(sign_b$) THEN sign$ = "-": SWAP a$, b$
ELSE
IF LEN(sign_a$) THEN sign$ = "-": SWAP sign_a$, sign_b$
END IF
END IF
END IF
z$ = ""
' Addition and subtraction of digits.
DO
i&& = i&& + s
x1$ = MID$(a$, LEN(a$) - i&& + 1, s)
x2$ = MID$(b$, LEN(b$) - i&& + 1, s)
IF LEN(x2$) > LEN(x1$) THEN SWAP x1$, x2$
a = VAL(sign_a$ + x1$) + VAL(sign_b$ + x2$) + c
IF x1$ + x2$ = "" AND c = 0 THEN EXIT DO
c = 0
IF a > VAL(STRING$(s, "9")) THEN a = a - 10 ^ s: c = 1
IF a < 0 THEN a = a + 10 ^ s: c = -1 ' a will never be less than 0.
tmp$ = LTRIM$(STR$(a))
z$ = STRING$(LEN(x1$) - LEN(tmp$), "0") + tmp$ + z$
LOOP
IF decimal% THEN
z$ = MID$(z$, 1, LEN(z$) - j&&) + "." + MID$(z$, LEN(z$) - j&& + 1)
END IF
' Remove any leading zeros.
DO
IF LEFT$(z$, 1) = "0" THEN z$ = MID$(z$, 2) ELSE EXIT DO
LOOP
IF z$ = "" OR z$ = "0" THEN z$ = "0" ELSE z$ = LEFT$(sign$, 1) + z$
runningtotal$ = z$
sign$ = "": sign_a$ = "": sign_b$ = "": i&& = 0: j&& = 0: decimal% = 0: c = 0
END SUB
FUNCTION sm_add$ (stringmatha$, stringmathb$)
operator$ = "+"
sm_add_subtract_router stringmatha$, operator$, stringmathb$, runningtotal$
sm_add$ = runningtotal$
END FUNCTION
FUNCTION sm_sub$ (stringmatha$, stringmathb$)
operator$ = "-"
sm_add_subtract_router stringmatha$, operator$, stringmathb$, runningtotal$
sm_sub$ = runningtotal$
END FUNCTION
FUNCTION sm_mult$ (stringmatha$, stringmathb$)
DIM AS _INTEGER64 a, c, aa, cc, s, ss
z$ = "": sign$ = "": mult&& = 0: h&& = 0: i&& = 0: j&& = 0: c = 0: decimal% = 0
zz$ = "": ii&& = 0: jj&& = 0
s = 8: ss = 18
a$ = stringmatha$: b$ = stringmathb$
IF INSTR(a$, "-") <> 0 OR INSTR(b$, "-") <> 0 THEN
IF INSTR(a$, "-") <> 0 AND INSTR(b$, "-") <> 0 THEN
a$ = MID$(a$, 2): b$ = MID$(b$, 2)
ELSE
IF INSTR(a$, "-") <> 0 THEN a$ = MID$(a$, 2) ELSE b$ = MID$(b$, 2)
sign$ = "-"
END IF
END IF
IF INSTR(a$, ".") <> 0 OR INSTR(b$, ".") <> 0 THEN
decimal% = -1
IF INSTR(a$, ".") <> 0 THEN
dec_a&& = LEN(MID$(a$, INSTR(a$, ".") + 1))
a$ = MID$(a$, 1, INSTR(a$, ".") - 1) + MID$(a$, INSTR(a$, ".") + 1)
END IF
IF INSTR(b$, ".") <> 0 THEN
dec_b&& = LEN(MID$(b$, INSTR(b$, ".") + 1))
b$ = MID$(b$, 1, INSTR(b$, ".") - 1) + MID$(b$, INSTR(b$, ".") + 1)
END IF
END IF
IF LEN(a$) < LEN(b$) THEN SWAP a$, b$ ' Needed so x1$ is always the largest for leading zero replacements.
' Multiplication of digits.
DO
h&& = h&& + s: i&& = 0
x2$ = MID$(b$, LEN(b$) - h&& + 1, s)
DO
i&& = i&& + s
x1$ = MID$(a$, LEN(a$) - i&& + 1, s)
a = VAL(x1$) * VAL(x2$) + c
c = 0
tmp$ = LTRIM$(STR$(a))
IF LEN(tmp$) > s THEN c = VAL(MID$(tmp$, 1, LEN(tmp$) - s)): tmp$ = MID$(tmp$, LEN(tmp$) - s + 1)
z$ = STRING$(LEN(x1$) - LEN(tmp$), "0") + tmp$ + z$
LOOP UNTIL i&& >= LEN(a$) AND c = 0
jj&& = jj&& + 1
IF jj&& > 1 THEN
ii&& = 0: cc = 0
aa$ = holdaa$
bb$ = z$ + STRING$((jj&& - 1) * s, "0")
' Addition only of digits.
DO
ii&& = ii&& + ss
xx1$ = MID$(aa$, LEN(aa$) - ii&& + 1, ss)
xx2$ = MID$(bb$, LEN(bb$) - ii&& + 1, ss)
IF LEN(xx1$) < LEN(xx2$) THEN SWAP xx1$, xx2$
aa = VAL(xx1$) + VAL(xx2$) + cc
IF xx1$ + xx2$ = "" AND cc = 0 THEN EXIT DO ' Prevents leading zeros.
cc = 0
IF aa > VAL(STRING$(ss, "9")) THEN aa = aa - 10 ^ ss: cc = 1
tmp$ = LTRIM$(STR$(aa))
zz$ = STRING$(LEN(xx1$) - LEN(tmp$), "0") + tmp$ + zz$
LOOP
DO WHILE LEFT$(zz$, 1) = "0"
IF LEFT$(zz$, 1) = "0" THEN zz$ = MID$(zz$, 2)
LOOP
IF zz$ = "" THEN zz$ = "0"
holdaa$ = zz$
ELSE
holdaa$ = z$ + STRING$(jj&& - 1, "0")
END IF
z$ = "": zz$ = ""
LOOP UNTIL h&& >= LEN(b$)
z$ = holdaa$
IF decimal% THEN
DO UNTIL LEN(z$) >= dec_a&& + dec_b&&
z$ = "0" + z$
LOOP
z$ = MID$(z$, 0, LEN(z$) - (dec_a&& + dec_b&& - 1)) + "." + MID$(z$, LEN(z$) - (dec_a&& + dec_b&&) + 1)
DO UNTIL RIGHT$(z$, 1) <> "0" AND RIGHT$(z$, 1) <> "."
z$ = MID$(z$, 1, LEN(z$) - 1)
LOOP
END IF
IF STRING$(LEN(z$), "0") = z$ OR z$ = "" OR z$ = "0" THEN z$ = "0" ELSE z$ = sign$ + z$
decimal% = 0: sign$ = ""
runningtotal$ = z$
sm_mult$ = z$
END FUNCTION
FUNCTION sm_div$ (stringmatha$, stringmathb$)
hold_stringmatha$ = stringmatha$: hold_stringmathb$ = stringmathb$
q$ = "": divisor$ = stringmathb$: dividend$ = stringmatha$
DO ' Falx loop.
'Strip off neg(s) and determine quotent sign.
IF LEFT$(divisor$, 1) = "-" THEN divisor$ = MID$(divisor$, 2): q$ = "-"
IF LEFT$(dividend$, 1) = "-" THEN dividend$ = MID$(dividend$, 2): IF q$ = "-" THEN q$ = "" ELSE q$ = "-"
' Quick results for divisor 1 or 0.
IF dividend$ = "0" THEN q$ = "0": EXIT DO
IF divisor$ = "1" THEN q$ = dividend$: EXIT DO
IF divisor$ = "0" THEN q$ = "Division by zero not possible.": EXIT DO
' Determine decimal direction. -1 to left, +1 to right.
gl% = 0: sm_greater_lesser divisor$, dividend$, gl%
IF betatest% AND gl% = 1 THEN PRINT divisor$; " > "; dividend$; " Move decimal to the left"
IF betatest% AND gl% = 0 THEN PRINT divisor$; " = "; dividend$
IF betatest% AND gl% = -1 THEN PRINT divisor$; " < "; dividend$; " Move deciml to the right."
IF gl% = 1 THEN ' Divisor is larger than dividend so decimal moves to the left.
div_decimal% = -1 ' Move decimal point to the left.
ELSEIF gl% = -1 THEN
div_decimal% = 1 ' Move decimal point to the right.
ELSE
' Divisor and dividend are the same number.
q$ = q$ + "1": EXIT DO
END IF
divisor_ratio_dividend% = gl%
' Strip off decimal point(s) and determine places in these next 2 routines.
dp&& = 0: dp2&& = 0: j2&& = 0
temp&& = INSTR(divisor$, ".")
IF temp&& THEN
divisor$ = MID$(divisor$, 1, temp&& - 1) + MID$(divisor$, temp&& + 1)
IF temp&& = 1 THEN
DO UNTIL LEFT$(divisor$, 1) <> "0" ' Strip off any leading zeros on divisor only.
divisor$ = MID$(divisor$, 2)
dp&& = dp&& + 1
LOOP
dp&& = dp&& + 1
ELSE
dp&& = -(temp&& - 2)
END IF
ELSE
dp&& = -(LEN(divisor$) - 1)
END IF
temp&& = INSTR(dividend$, ".")
IF temp&& THEN
dividend$ = MID$(dividend$, 1, temp&& - 1) + MID$(dividend$, temp&& + 1)
IF temp&& = 1 THEN
DO UNTIL LEFT$(dividend$, 1) <> "0" ' Strip off any leading zeros on divisor only.
dividend$ = MID$(dividend$, 2)
dp2&& = dp2&& + 1
LOOP
dp2&& = dp2&& + 1
ELSE
dp2&& = -(temp&& - 2)
END IF
ELSE
dp2&& = -(LEN(dividend$) - 1)
END IF
IF betatest% THEN COLOR 11: PRINT "Divisor decimal moves "; LTRIM$(STR$(dp&&)); ". Dividend decimal moves"; LTRIM$(STR$(dp2&&)); ". Quotent decimal ABS("; LTRIM$(STR$(dp&&)); " - "; LTRIM$(STR$(dp2&&)); ") =";: COLOR 14: PRINT ABS(dp&& - dp2&&);: COLOR 11: PRINT "+ any adjustment.": COLOR 7
dp&& = ABS(dp&& - dp2&&)
IF betatest% THEN PRINT "Divisor 1st# = "; MID$(divisor$, 1, 1); " Remainder 1st# = "; MID$(dividend$, 1, 1)
' Adjust decimal place for instances when divisor is larger than remainder the length of the divisor.
j% = 0
IF MID$(divisor$, 1, 1) > MID$(dividend$, 1, 1) THEN
j% = 1
IF betatest% THEN PRINT "Larger divisor, so move quotent decimal one place back to: ";: COLOR 14: PRINT LTRIM$(STR$(dp&&)): COLOR 7
ELSEIF MID$(divisor$, 1, 1) = MID$(dividend$, 1, 1) THEN
IF LEN(divisor$) = LEN(dividend$) THEN
IF divisor$ > dividend$ THEN j% = 1
ELSE
IF LEN(divisor$) > LEN(dividend$) THEN
temp$ = dividend$ + STRING$(LEN(divisor$) - LEN(dividend$), "0")
ELSE
temp$ = MID$(dividend$, 1, LEN(divisor$))
END IF
IF divisor$ > temp$ THEN j% = 1
END IF
IF betatest% THEN
IF j% THEN PRINT "Larger divisor than dividend at LEN(divisor$), so move quotent decimal one place back to: ";: COLOR 14: PRINT LTRIM$(STR$(dp&&)): COLOR 7
IF j% = 0 THEN PRINT "Smaller divisor than dividend at LEN(divisor$), so no quotent decimal place adjustment needed. Quotent decimal place = ";: COLOR 14: PRINT LTRIM$(STR$(dp&&)): COLOR 7
END IF
ELSE
j% = 0
IF betatest% THEN PRINT "Smaller divisor, so no quotent decimal place adjustment needed. Quotent decimal place = ";: COLOR 14: PRINT LTRIM$(STR$(dp&&)): COLOR 7
END IF
IF j% THEN dp&& = dp&& - div_decimal%
origdividend$ = dividend$
' Determine length of divisor and dividend to begin initial long divison step.
gl% = 2: sm_greater_lesser divisor$, MID$(dividend$, 1, LEN(divisor$)) + STRING$(LEN(divisor$) - LEN(dividend$), "0"), gl%
divisor_ratio_dividend% = gl%
IF gl% = 1 AND MID$(dividend$, 1, 1) <> "0" THEN
dividend$ = MID$(dividend$, 1, LEN(divisor$) + 1) + STRING$(LEN(divisor$) + 1 - LEN(dividend$), "0")
ELSE
dividend$ = MID$(dividend$, 1, LEN(divisor$)) + STRING$(LEN(divisor$) - LEN(dividend$), "0")
END IF
' Long divison loop. Mult and subtraction of dividend and remainder.
k&& = 0
IF betatest% THEN PRINT "Begin long divison loop..."
DO
SELECT CASE MID$(divisor$, 1, 1)
CASE IS < MID$(dividend$, 1, 1)
adj_rem_len% = 0
CASE IS = MID$(dividend$, 1, 1)
gl% = 2: sm_greater_lesser divisor$, MID$(dividend$, 1, LEN(divisor$)), gl%
IF gl% = 1 THEN adj_rem_len% = 1 ELSE adj_rem_len% = 0
CASE IS > MID$(dividend$, 1, 1)
adj_rem_len% = 1
END SELECT
IF j2&& = 0 THEN j2&& = LEN(divisor$) + adj_rem_len%
DO
IF LEN(divisor$) > LEN(dividend$) THEN
w3&& = 0: runningtotal$ = dividend$: stringmathb$ = "0"
IF betatest% THEN PRINT: COLOR 3: PRINT "Divisor is larger so "; dividend$; " \ "; divisor$; " =";: COLOR 5: PRINT w3&&: COLOR 7
EXIT DO
END IF
IF LEN(divisor$) = LEN(dividend$) THEN
gl% = 2: sm_greater_lesser divisor$, dividend$, gl%
IF gl% = 1 THEN
w3&& = 0: runningtotal$ = dividend$: stringmathb$ = "0"
IF betatest% THEN COLOR 9: PRINT "Length of divisor is the same as remainder but remainder is smaller so w3&& = ";: COLOR 5: PRINT "0": COLOR 7
EXIT DO
END IF
END IF
SELECT CASE LEN(dividend$)
CASE IS > 2
w3&& = VAL(MID$(dividend$, 1, 2 + adj_rem_len%)) \ VAL(MID$(divisor$, 1, 2))
IF betatest% THEN PRINT MID$(dividend$, 1, 2 + adj_rem_len%); " \ "; MID$(divisor$, 1, 2); " =";
CASE ELSE
w3&& = VAL(MID$(dividend$, 1, 1 + adj_rem_len%)) \ VAL(MID$(divisor$, 1, 1))
IF betatest% THEN PRINT MID$(dividend$, 1, 1 + adj_rem_len%); " \ "; MID$(divisor$, 1, 1); " =";
END SELECT
IF betatest% THEN COLOR 5: PRINT " " + LTRIM$(STR$(w3&&));: COLOR 7: PRINT ". Begin mult est. at or one above this number."
IF w3&& < 9 THEN w3&& = w3&& + 1 ELSE IF w3&& = 10 THEN w3&& = 9
DO
stringmatha$ = divisor$: stringmathb$ = LTRIM$(STR$(w3&&))
runningtotal$ = sm_mult$(divisor$, LTRIM$(STR$(w3&&)))
gl% = 2: sm_greater_lesser runningtotal$, dividend$, gl%
IF gl% <= 0 OR w3&& = 0 THEN EXIT DO
IF betatest% THEN COLOR 8: PRINT "Mult loop:"; w3&&; "* "; divisor$; " = "; runningtotal$: COLOR 7
w3&& = w3&& - 1
LOOP
stringmatha$ = dividend$: stringmathb$ = runningtotal$
sm_add_subtract_router dividend$, "-", stringmathb$, runningtotal$
EXIT DO
LOOP
IF betatest% THEN PRINT LTRIM$(STR$(w3&&)); " * "; divisor$; " = "; stringmathb$; " | "; stringmatha$; " - "; stringmathb$; " = "; runningtotal$; " Remainder and drop-down = ";
j2&& = j2&& + 1
drop$ = "0": MID$(drop$, 1, 1) = MID$(origdividend$, j2&&, 1)
IF runningtotal$ <> "0" THEN remainder$ = runningtotal$ ELSE remainder$ = ""
dividend$ = remainder$ + drop$
w3$ = LTRIM$(STR$(w3&&))
temp$ = ""
IF div_decimal% = -1 THEN
IF dp&& AND k&& = 0 THEN
q$ = q$ + "." + STRING$(dp&& - 1, "0")
IF w3&& = 0 THEN w3$ = ""
END IF
END IF
IF div_decimal% >= 0 THEN
IF dp&& = k&& THEN
temp$ = "."
END IF
END IF
q$ = q$ + w3$ + temp$
IF betatest% AND remainder$ = "" THEN betatemp$ = CHR$(34) + CHR$(34) ELSE IF betatest% THEN betatemp$ = remainder$
IF betatest% AND MID$(origdividend$, j2&&, 1) = "" THEN betatemp2$ = CHR$(34) + CHR$(34) ELSE IF betatest% THEN betatemp2$ = MID$(origdividend$, j2&&, 1)
IF betatest% THEN PRINT dividend$; " ("; betatemp$; " + "; drop$; ") at:"; j2&&; "of "; origdividend$; " Loop"; k&& + 1; "Quotent = ";: COLOR 14, 4: PRINT q$;: COLOR 7, 0: PRINT: SLEEP
' Check to terminate
IF div_decimal% = -1 THEN
' Decimal to left.
IF remainder$ = "" AND MID$(origdividend$, j2&&, 1) = "" OR LEN(q$) >= limit&& THEN EXIT DO
ELSE
' Decimal to right.
IF remainder$ = "" AND MID$(origdividend$, j2&&, 1) = "" AND k&& >= dp&& OR LEN(q$) >= limit&& THEN EXIT DO
END IF
IF INKEY$ = " " THEN EXIT DO
k&& = k&& + 1
LOOP
EXIT DO
LOOP
IF RIGHT$(q$, 1) = "." AND divisor$ <> "0" THEN runningtotal$ = MID$(q$, 1, LEN(q$) - 1) ELSE runningtotal$ = q$
sm_div$ = runningtotal$
stringmatha$ = hold_stringmatha$: stringmathb$ = hold_stringmathb$
END FUNCTIONPete
RE: Pascal's Triangle and nth roots. - Jack - 09-25-2022
not bad
RE: Pascal's Triangle and nth roots. - Pete - 09-26-2022
(09-25-2022, 08:28 PM)Jack Wrote: not bad
@Jack
I did find one error. oldx$ needed to be zeroed. Apparently, when a digit in the answer is zero, oldx$ did not get redefined, as the loop exited before that could happen. I zeroed it in the DO:LOOP, and now it works as expected. It took some testing to see that error produced. I noticed it on the cube root of 19.
QUESTION: By any chance do you know in situations where the digits will not terminate before the digit limit is reached, or simply will not terminate like pi, is there anyway the remainder can be made into a fraction, as in regular long division?
Here is a brief example in numeric form with printed inf to the screen. The "Target" is the remainder and "d" is the growing answer per digit. Note: Ignore decimal point. It's buggy. Left over from a square root prog and needs further tweaking.
Code: (Select All)
$CONSOLE:ONLY
DIM AS DOUBLE d, i, j, r, t, x, oldx
LINE INPUT "Whole number: "; n$
LINE INPUT "Root: "; r$
r = VAL(r$)
'''n$ = LTRIM$(STR$(n%))
hh&& = LEN(n$)
h&& = (r - (r - LEN(n$) MOD r)) + 1
t = VAL(MID$(n$, 1, h&& - 1))
limit&& = 8
' Calculate Pascal's Triangle.
REDIM p$(r + 1)
FOR i1&& = 1 TO r + 1
p&& = 1
FOR j1&& = 1 TO i1&&
p$(j1&&) = LTRIM$(STR$(p&&))
p&& = p&& * (i1&& - j1&&) \ j1&&
NEXT
NEXT
DO
oldx = 0
lcnt&& = lcnt&& + 1
PRINT "Target ="; t
FOR j = 1 TO 10
x = 0
FOR i = 1 TO r
p&& = VAL(p$(i))
IF i = 1 THEN
PRINT i; p&&; j; d; " (10 ^"; (i - 1); "*"; p&&; "* d ^"; i - 1; " * j ^"; (r + 1 - i); ") + "
x = x + 10 ^ (i - 1) * p&& * d ^ (i - 1) * j ^ (r + 1 - i)
ELSE
PRINT i; p&&; j; d; " (10 ^"; (i - 1); "*"; p&&; "* d ^"; i - 1; " * j ^"; (r + 1 - i); ") + "
x = x + 10 ^ (i - 1) * p&& * d ^ (i - 1) * j ^ (r + 1 - i)
END IF
NEXT
PRINT "<<<"; x;" Press a key to cont...": SLEEP
IF x > t THEN EXIT FOR
oldx = x: COLOR 6: PRINT "oldx ="; oldx, t; oldx >= t: COLOR 7
NEXT
d = VAL(LTRIM$(STR$(d)) + LTRIM$(STR$(j - 1)))
PRINT "t - oldx as: "; t; "-"; oldx; "="; t - oldx,: COLOR 14: PRINT "d ="; d: COLOR 7
tmp1$ = LTRIM$(STR$(t - oldx))
tmp2$ = MID$(n$, h&&, r) + STRING$(r - LEN(MID$(n$, h&&, r)), "0")
t = VAL(tmp1$ + tmp2$) ' This will remove any leading zeros carried down.
h&& = h&& + r
IF t = 0 AND h&& >= LEN(n$) OR lcnt&& = limit&& THEN EXIT DO
t$ = LTRIM$(STR$(t))
IF dpx&& = 0 THEN ' Decimal point relocator. Limited to && size unless converted to string.
IF h&& >= hh&& THEN
dpx&& = INT(hh&& / 2 + .5)
IF dpx&& = 0 THEN dpx&& = -1 ' Do not set to zero as -1 accomplishes the same thing and prevents ongoing loops here.
END IF
END IF
LOOP
d$ = LTRIM$(STR$(d))
IF dpx&& THEN
sm_rt$ = MID$(d$, 0, dpx&& + 1) + "." + MID$(d$, dpx&& + 1)
ELSE
sm_rt$ = d$
END IF
PRINT
PRINT "Answer: "; sm_rt$
PRINT
RUNThanks for having a look.
Pete