Posts: 99
Threads: 3
Joined: Apr 2022
Reputation:
10
Between string math and pi, you've created some real rabbit-hole posts. I've been opening WAY too many browser tabs lately, and am having trouble deciding to close them. I've become a tab hoarder.
Anyway, I'll just leave a couple of those tabs here:
https://en.wikipedia.org/wiki/Arbitrary-...arithmetic
https://en.wikipedia.org/wiki/Division_algorithm
My own (very) early experiments with high-precision math pretty much stayed in the double-precision range, using elementary textbook methods. I never tried anything fancy. Of course, those were the pre-internet days and my local & school libraries were somewhat limited....
Posts: 1,616
Threads: 157
Joined: Apr 2022
Reputation:
77
(08-18-2022, 05:20 PM)JRace Wrote: Between string math and pi, you've created some real rabbit-hole posts. I've been opening WAY too many browser tabs lately, and am having trouble deciding to close them. I've become a tab hoarder.
Anyway, I'll just leave a couple of those tabs here:
https://en.wikipedia.org/wiki/Arbitrary-...arithmetic
https://en.wikipedia.org/wiki/Division_algorithm
My own (very) early experiments with high-precision math pretty much stayed in the double-precision range, using elementary textbook methods. I never tried anything fancy. Of course, those were the pre-internet days and my local & school libraries were somewhat limited....
I usually have 30+ tabs open. I love tabs. Rabbit holes, not so much. That is a current worry I have over this square root process, because I need to marry it to my numerator / denominator method, used in my calculator build.
Did you see the discrepancy I posted in regard to QB64 SQR and string math for SQR(78)?
Anyway, here's the latest, greatest Square Root installment. This one use LINE INPUT and string validation, so we can start to put in very large numbers, provided the limit&& variable is increased in the code. Un remark the betatest% variable to see the square root calculation process...
Thanks for the additional links. These are fun reads!
Code: (Select All) $CHECKING:OFF
WIDTH 160, 42
_SCREENMOVE 0, 0
DO
limit&& = 32
'betatest% = -1
IF betatest% THEN limit&& = 16
DO
INPUT "Number: "; x$: PRINT
IF x$ = "" THEN SYSTEM
IF LEFT$(x$, 1) = "-" THEN
PRINT "Negatives not allowed. Redo..": _DELAY 2: PRINT
ELSE
validate_string x$
IF INSTR(x$, "invalid") = 0 THEN EXIT DO
PRINT "Sorry, "; x$: _DELAY 1: PRINT
END IF
LOOP
x# = VAL(x$) ' Needed for QB64 SQR() comparison only.
oldy$ = ""
IF INSTR(x$, ".") THEN
decx$ = MID$(x$, 1, INSTR(x$, ".") - 1)
x$ = MID$(x$, 1, INSTR(x$, ".") - 1) + MID$(x$, INSTR(x$, ".") + 1)
IF LEN(x$) = 1 THEN x$ = x$ + "0"
ELSE
decx$ = x$
END IF
j&& = LEN(decx$)
' VAL() okay, one character eval.
IF VAL(RIGHT$(LTRIM$(STR$(j&&)), 1)) / 2 = VAL(RIGHT$(LTRIM$(STR$(j&&)), 1)) \ 2 THEN
i&& = 1 ' Even number length.
ELSE
i&& = 0 ' Odd number length.
END IF
DO
stringmatha$ = z$: stringmathb$ = k$
string_math z$, "-", k$, runningtotal$, terminating_decimal%, limit&&
z$ = runningtotal$ + (MID$(x$, i&&, 2))
IF LEFT$(z$, 1) = "0" THEN z$ = MID$(z$, 2) ' Remove leading zeros
oldy$ = ""
FOR j&& = 1 TO 10
IF i&& > 1 THEN
string_math sqrt$, "*", "2", y$, terminating_decimal%, limit&&
y$ = y$ + LTRIM$(STR$(j&&))
ELSE
y$ = LTRIM$(STR$(j&&))
END IF
string_math y$, "*", LTRIM$(STR$(j&&)), runningtotal$, terminating_decimal%, limit&&
string_compare runningtotal$, z$, gl%
IF gl% > -1 THEN
IF gl% = 0 THEN
h% = 0: oldy$ = y$ ' Perfect square division.
ELSE
h% = 1
END IF
string_math oldy$, "*", LTRIM$(STR$(j&& - h%)), runningtotal$, terminating_decimal%, limit&&
IF STRING$(LEN(z$), "0") = z$ AND runningtotal$ = "0" AND i&& >= LEN(decx$) THEN EXIT DO
IF dp&& = 0 THEN ' Limited to && size unless converted to string.
IF i&& >= LEN(decx$) THEN
dp&& = INT(LEN(decx$) / 2 + .5)
IF dp&& = 0 THEN dp&& = -1
END IF
END IF
IF betatest% THEN PRINT "Sqrt "; sqrt$; " * 2 = ";: COLOR 2, 0: PRINT LTRIM$(STR$(VAL(sqrt$) * 2));: COLOR 7, 0: PRINT LTRIM$(STR$(j&& - h%)); " * "; LTRIM$(STR$(j&& - h%)); " ="; VAL(oldy$) * (j&& - h%)
sqrt$ = sqrt$ + LTRIM$(STR$(j&& - h%))
string_math oldy$, "*", LTRIM$(STR$(j&& - h%)), runningtotal$, terminating_decimal%, limit&&
k$ = runningtotal$
IF betatest% THEN PRINT "Remainder "; z$; " minus "; k$; " = ";
EXIT FOR
END IF
oldy$ = y$
NEXT
IF betatest% THEN
string_math stringmatha$, "-", stringmathb$, runningtotal$, terminating_decimal%, limit&&
PRINT runningtotal$; " sqrt = "; sqrt$
END IF
i&& = i&& + 2
IF LEN(z$) >= limit&& THEN EXIT DO
x$ = x$ + "00"
LOOP
PRINT
IF dp&& THEN
sqrt$ = MID$(sqrt$, 0, dp&& + 1) + "." + MID$(sqrt$, dp&& + 1)
END IF
_CLIPBOARD$ = sqrt$
PRINT "QB64 SQR:"; SQR(x#)
PRINT "Pete SQR: "; sqrt$: _DELAY 1: CLEAR
PRINT
LOOP
SUB string_math (stringmatha$, operator$, stringmathb$, runningtotal$, terminating_decimal%, limit&&)
SELECT CASE operator$
CASE "+", "-"
GOTO string_add_subtract
CASE "*"
GOTO string_multiply
CASE "/"
GOTO string_divide
CASE ELSE
PRINT "Error, no operator selected. operator$ = "; operator$
END SELECT
string_divide:
terminating_decimal% = 0: divsign% = 0: divremainder& = 0: divremainder$ = "": divplace& = 0: divplace2& = 0: quotient$ = "": divcarry& = 0
operationdivision% = -1
divbuffer& = LEN(stringmathb$) - LEN(stringmatha$)
IF divbuffer& < 0 THEN divbuffer& = 0
d2dividend$ = stringmatha$
d1divisor$ = stringmathb$
IF LEFT$(d1divisor$, 1) = "0" AND LEN(d1divisor$) = 1 THEN PRINT "Division by zero not allowed.": divsign% = 0: operationdivision% = 0: EXIT SUB
IF LEFT$(d1divisor$, 1) = "-" THEN divsign% = -1: d1divisor$ = MID$(d1divisor$, 2)
IF LEFT$(d2dividend$, 1) = "-" THEN
IF divsign% THEN
divsign% = 0
ELSE
divsign% = -1
END IF
d2dividend$ = MID$(d2dividend$, 2)
END IF
IF INSTR(d1divisor$, ".") <> 0 THEN
DO UNTIL RIGHT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 1, LEN(d1divisor$) - 1) ' Strip off trailing zeros
LOOP
divplace& = LEN(d1divisor$) - INSTR(d1divisor$, ".")
d1divisor$ = MID$(d1divisor$, 1, INSTR(d1divisor$, ".") - 1) + MID$(d1divisor$, INSTR(d1divisor$, ".") + 1) ' Strip off decimal point.
DO UNTIL LEFT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 2) ' Strip off leading zeros for divisors smaller than .1
LOOP
END IF
IF INSTR(d2dividend$, ".") <> 0 THEN
d2dividend$ = d2dividend$ + STRING$(divplace& - LEN(d2dividend$) - INSTR(d2dividend$, "."), "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace2& = INSTR(d2dividend$, ".")
DO UNTIL RIGHT$(d2dividend$, 1) <> "0"
d2dividend$ = MID$(d2dividend$, 1, LEN(d2dividend$) - 1) ' Strip off trailing zeros
LOOP
d2dividend$ = MID$(d2dividend$, 1, INSTR(d2dividend$, ".") - 1) + MID$(d2dividend$, INSTR(d2dividend$, ".") + 1) ' Strip off decimal point.
ELSE
d2dividend$ = d2dividend$ + STRING$(divplace&, "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace& = 0
END IF
DO
DO
divremainder& = divremainder& + 1: divremainder$ = divremainder$ + MID$(d2dividend$, divremainder&, 1)
IF MID$(d2dividend$, divremainder&, 1) = "" THEN
IF divremainder$ = STRING$(LEN(divremainder$), "0") AND LEN(quotient$) > LEN(d2dividend$) THEN
divflag% = -1
terminating_decimal% = -1
EXIT DO
END IF
divcarry& = divcarry& + 1
IF divcarry& = 1 THEN divplace3& = divremainder& - 1
IF divcarry& > limit&& + 1 + divbuffer& THEN
divflag% = -2: EXIT DO
END IF
divremainder$ = divremainder$ + "0" ' No more digits to bring down.
END IF
IF LEN(divremainder$) > LEN(d1divisor$) OR LEN(divremainder$) = LEN(d1divisor$) AND divremainder$ >= d1divisor$ THEN EXIT DO
quotient$ = quotient$ + "0"
LOOP
IF divflag% THEN divflag% = 0: EXIT DO
FOR div_i% = 9 TO 1 STEP -1
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply
tempcutd$ = divremainder$ ' divremainder$ can be 00 or other leading zero values.
DO
IF LEN(tempcutd$) = 1 THEN EXIT DO
IF LEFT$(tempcutd$, 1) = "0" THEN
tempcutd$ = MID$(tempcutd$, 2)
ELSE
EXIT DO
END IF
LOOP
IF LEN(tempcutd$) > LEN(m_product$) OR LEN(tempcutd$) = LEN(m_product$) AND m_product$ <= tempcutd$ THEN EXIT FOR
NEXT
quotient$ = quotient$ + LTRIM$(STR$(div_i%))
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply
operator$ = "-"
stringmatha$ = divremainder$
stringmathb$ = m_product$
GOSUB string_add_subtract
divremainder$ = stringmatha$
operator$ = "/"
LOOP
IF divplace& = 0 AND divplace2& = 0 THEN divplace& = divplace3&
IF divplace2& THEN divplace& = divplace& + divplace2& - 1
IF quotient$ = "" THEN divplace& = 0 ' dividend is zero.
IF divplace& OR divplace2& THEN
quotient$ = MID$(quotient$, 1, divplace&) + "." + MID$(quotient$, divplace& + 1)
DO UNTIL RIGHT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off trailing zeros
LOOP
IF RIGHT$(quotient$, 1) = "." THEN quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off abandoned decimal.
END IF
DO UNTIL LEFT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 2) ' Strip off leading zeros
LOOP
IF quotient$ = "" THEN quotient$ = "0": divsign% = 0
operationdivision% = 0
stringmathb$ = quotient$: quotient$ = ""
IF stringmathb$ = "overflow" THEN divsign% = 0: operationdivision% = 0: EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF divsign% THEN runningtotal$ = "-" + runningtotal$
IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
operationdivision% = 0
EXIT SUB
string_multiply:
m_decimal_places& = 0: m_product$ = ""
fac1$ = stringmatha$: fac2$ = stringmathb$ ' Make numbers whole numbers and remove any - sign.
IF LEFT$(fac1$, 1) = "-" THEN fac1$ = MID$(fac1$, 2): m_sign% = -1
IF LEFT$(fac2$, 1) = "-" THEN fac2$ = MID$(fac2$, 2): IF m_sign% THEN m_sign% = 0 ELSE m_sign% = -1
IF INSTR(fac1$, ".") <> 0 THEN m_decimal_places& = LEN(fac1$) - INSTR(fac1$, "."): fac1$ = MID$(fac1$, 1, INSTR(fac1$, ".") - 1) + MID$(fac1$, INSTR(fac1$, ".") + 1)
IF INSTR(fac2$, ".") <> 0 THEN m_decimal_places& = m_decimal_places& + LEN(fac2$) - INSTR(fac2$, "."): fac2$ = MID$(fac2$, 1, INSTR(fac2$, ".") - 1) + MID$(fac2$, INSTR(fac2$, ".") + 1)
FOR m_i& = LEN(fac2$) TO 1 STEP -1 ' Multiply each charater top and bottom.
m_k& = m_l&
m_x2$ = MID$(fac2$, m_i&, 1)
FOR m_j& = LEN(fac1$) TO 1 STEP -1
m_x1$ = MID$(fac1$, m_j&, 1)
IF m_product$ <> "" THEN
m_add$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0")
m_t& = 0: m_xproduct$ = "": m_carry% = 0
DO ' Add multiplied characters together.
m_x3$ = MID$(m_add$, LEN(m_add$) - m_t&, 1)
m_x4$ = MID$(m_product$, LEN(m_product$) - m_t&, 1)
IF m_x3$ = "" AND m_x4$ = "" THEN
IF m_carry% THEN m_xproduct$ = "1" + m_xproduct$
EXIT DO
END IF
m_g% = VAL(m_x3$) + VAL(m_x4$) + m_carry%
IF m_g% >= 10 THEN m_g% = m_g% - 10: m_carry% = 1 ELSE m_carry% = 0
m_xproduct$ = LTRIM$(STR$(m_g%)) + m_xproduct$
m_t& = m_t& + 1
LOOP
m_product$ = m_xproduct$: m_xproduct$ = ""
ELSE
m_product$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0") ' First loop makes variable here.
END IF
m_k& = m_k& + 1 ' Adds trailing zeros multiplication
NEXT
m_l& = m_l& + 1 ' Used to reset value for m_k& adding one trailing zer for each loop.
NEXT
fac1$ = "": fac2$ = "": m_l& = 0: m_k& = 0: m_t& = 0
IF m_decimal_places& > LEN(m_product$) THEN m_product$ = STRING$(m_decimal_places& - LEN(m_product$), "0") + m_product$ ' Add any leading zeros to a decimal. Ex: .02 * .01 is factored as 002. It needs one leading zero before adding the decimal point, .0002.
IF m_decimal_places& AND m_product$ <> "0" THEN ' Replace any decimal point.
m_product$ = MID$(m_product$, 1, LEN(m_product$) - m_decimal_places&) + "." + MID$(m_product$, LEN(m_product$) - m_decimal_places& + 1)
END IF
DO UNTIL LEFT$(m_product$, 1) <> "0" ' Remove leading zeros.
m_product$ = MID$(m_product$, 2)
LOOP
IF m_decimal_places& THEN
DO UNTIL RIGHT$(m_product$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1)
LOOP
END IF
IF m_product$ = "" THEN m_product$ = "0": m_sign% = 0
IF RIGHT$(m_product$, 1) = "." THEN m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1) ' Remove decimal from the end of an integer total.
IF operationdivision% THEN m_sign% = 0: RETURN
stringmathb$ = m_product$: m_product$ = ""
IF stringmathb$ = "overflow" THEN EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF m_sign% THEN runningtotal$ = "-" + runningtotal$: m_sign% = 0
EXIT SUB
string_add_subtract:
IF INSTR(stringmatha$, ".") <> 0 THEN ' Evaluate sum for decimal fraction.
sumplace& = LEN(stringmatha$) - INSTR(stringmatha$, ".")
stringmatha$ = MID$(stringmatha$, 1, INSTR(stringmatha$, ".") - 1) + MID$(stringmatha$, INSTR(stringmatha$, ".") + 1) ' Strip out decimal
END IF
IF INSTR(stringmathb$, ".") <> 0 THEN ' Evaluate number for decimal fraction.
numplace& = LEN(stringmathb$) - INSTR(stringmathb$, ".")
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Strip out decimal
END IF
IF sumplace& > numplace& THEN addsubplace& = sumplace& ELSE addsubplace& = numplace&
IF sumplace& > addsubplace& THEN
stringmatha$ = stringmatha$ + STRING$(sumplace& - addsubplace&, "0")
ELSEIF addsubplace& > sumplace& THEN
stringmatha$ = stringmatha$ + STRING$(addsubplace& - sumplace&, "0")
END IF
IF numplace& > addsubplace& THEN
stringmathb$ = stringmathb$ + STRING$(numplace& - addsubplace&, "0")
ELSEIF addsubplace& > numplace& THEN
stringmathb$ = stringmathb$ + STRING$(addsubplace& - numplace&, "0")
END IF ' END Decimal evaluations.
IF LEFT$(stringmatha$, 1) = "-" THEN sign_input$ = "-" ELSE sign_input$ = "+"
IF LEFT$(stringmathb$, 1) = "-" THEN sign_total$ = "-" ELSE sign_total$ = "+"
addsubsign% = 0
SELECT CASE sign_input$ + operator$ + sign_total$
CASE "+++", "+--"
operator$ = "+"
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
CASE "++-", "+-+"
operator$ = "-"
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
GOSUB string_comp
IF gl% < 0 THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
CASE "---", "-++"
operator$ = "-"
IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
GOSUB string_comp
IF gl% < 0 THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
CASE "--+", "-+-"
operator$ = "+"
IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
addsubsign% = -1
END SELECT
IF LEN(stringmatha$) > LEN(stringmathb$) THEN
stringmathb$ = STRING$(LEN(stringmatha$) - LEN(stringmathb$), "0") + stringmathb$
ELSEIF LEN(stringmatha$) < LEN(stringmathb$) THEN
stringmatha$ = STRING$(LEN(stringmathb$) - LEN(stringmatha$), "0") + stringmatha$
END IF
addsubx1$ = ""
SELECT CASE operator$
CASE "+", "="
FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) + VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
IF addsubx1% > 9 THEN addsubx1% = addsubx1% - 10: addsubcarry% = 1 ELSE addsubcarry% = 0
addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
NEXT
IF addsubcarry% THEN addsubx1$ = "1" + addsubx1$: addsubcarry% = 0
GOSUB replace_decimal
CASE "-"
FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) - VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
IF addsubx1% < 0 THEN addsubx1% = addsubx1% + 10: addsubcarry% = -1 ELSE addsubcarry% = 0
addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
NEXT
IF addsubx1$ <> "" AND addsubx1$ <> STRING$(LEN(addsubx1$), "0") THEN GOSUB replace_decimal
DO UNTIL LEFT$(addsubx1$, 1) <> "0" ' Remove leading zeros.
addsubx1$ = MID$(addsubx1$, 2)
LOOP
IF addsubx1$ = "" THEN
addsubx1$ = "0": addsubsign% = 0
ELSE
IF addsubcarry% THEN addsubx1$ = "-" + addsubx1$: addsubcarry% = 0
END IF
END SELECT
IF addsubsign% THEN
IF LEFT$(addsubx1$, 1) = "-" THEN addsubx1$ = MID$(addsubx1$, 2) ELSE addsubx1$ = "-" + addsubx1$
END IF
stringmatha$ = addsubx1$: addsubx1$ = ""
IF operationdivision% THEN RETURN
stringmathb$ = stringmatha$: stringmatha$ = ""
IF LEFT$(stringmathb$, 1) = "-" THEN
stringmathb$ = MID$(stringmathb$, 2)
n2sign$ = "-"
ELSE
n2sign$ = ""
END IF
IF stringmathb$ = "overflow" THEN n2sign$ = "": EXIT SUB
runningtotal$ = n2sign$ + stringmathb$: n2sign$ = ""
EXIT SUB
replace_decimal:
IF addsubplace& THEN
addsubx1$ = STRING$(addsubplace& - LEN(addsubx1$), "0") + addsubx1$
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - addsubplace&) + "." + MID$(addsubx1$, LEN(addsubx1$) - addsubplace& + 1)
DO UNTIL RIGHT$(addsubx1$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1)
addsubplace& = addsubplace& - 1
LOOP
IF RIGHT$(addsubx1$, 1) = "." THEN addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1) ' Number is now an integer.
END IF
RETURN
string_comp:
DO
REM Remove trailing zeros after a decimal point.
IF INSTR(acomp$, ".") THEN
DO UNTIL RIGHT$(acomp$, 1) <> "0" AND RIGHT$(acomp$, 1) <> "." AND RIGHT$(acomp$, 1) <> "-"
acomp$ = MID$(acomp$, 1, LEN(acomp$) - 1)
LOOP
END IF
IF INSTR(bcomp$, ".") THEN
DO UNTIL RIGHT$(bcomp$, 1) <> "0" AND RIGHT$(bcomp$, 1) <> "." AND RIGHT$(bcomp$, 1) <> "-"
bcomp$ = MID$(bcomp$, 1, LEN(bcomp$) - 1)
LOOP
END IF
IF MID$(acomp$, 1, 2) = "-0" OR acomp$ = "" OR acomp$ = "-" THEN acomp$ = "0"
IF MID$(bcomp$, 1, 2) = "-0" OR bcomp$ = "" OR bcomp$ = "-" THEN bcomp$ = "0"
' A - and +
IF LEFT$(acomp$, 1) = "-" THEN j% = -1
IF LEFT$(bcomp$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(acomp$, ".")
k% = INSTR(bcomp$, ".")
IF j% = 0 AND k% THEN
IF acomp$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF bcomp$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF acomp$ > bcomp$ THEN
gl% = 1
ELSEIF acomp$ = bcomp$ THEN gl% = 0
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(acomp$)
CASE IS < LEN(bcomp$)
gl% = -1
CASE IS = LEN(bcomp$)
IF acomp$ = bcomp$ THEN
gl% = 0
ELSEIF acomp$ > bcomp$ THEN gl% = 1
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
CASE IS > LEN(bcomp$)
gl% = 1
END SELECT
EXIT DO
LOOP
RETURN
END SUB
SUB string_compare (compa$, compb$, gl%)
DO
REM Remove trailing zeros after a decimal point.
IF INSTR(compa$, ".") THEN
DO UNTIL RIGHT$(compa$, 1) <> "0" AND RIGHT$(compa$, 1) <> "." AND RIGHT$(compa$, 1) <> "-"
compa$ = MID$(compa$, 1, LEN(compa$) - 1)
LOOP
END IF
IF INSTR(compb$, ".") THEN
DO UNTIL RIGHT$(compb$, 1) <> "0" AND RIGHT$(compb$, 1) <> "." AND RIGHT$(compb$, 1) <> "-"
compb$ = MID$(compb$, 1, LEN(compb$) - 1)
LOOP
END IF
IF MID$(compa$, 1, 2) = "-0" OR compa$ = "" OR compa$ = "-" THEN compa$ = "0"
IF MID$(compb$, 1, 2) = "-0" OR compb$ = "" OR compb$ = "-" THEN compb$ = "0"
' A - and +
IF LEFT$(compa$, 1) = "-" THEN j% = -1
IF LEFT$(compb$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(compa$, ".")
k% = INSTR(compb$, ".")
IF j% = 0 AND k% THEN
IF compa$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF compb$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF compa$ > compb$ THEN
gl% = 1
ELSEIF compa$ = compb$ THEN gl% = 0
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(compa$)
CASE IS < LEN(compb$)
gl% = -1
CASE IS = LEN(compb$)
IF compa$ = compb$ THEN
gl% = 0
ELSEIF compa$ > compb$ THEN gl% = 1
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
CASE IS > LEN(compb$)
gl% = 1
END SELECT
EXIT DO
LOOP
END SUB
SUB validate_string (stringmathb$)
DO ' Faux loop.
vsn_negcnt& = 0: vsn_poscnt& = 0: vsn_depresent& = 0: decimalcnt& = 0: vsn_numberpresent& = 0: vsn_zerospresent& = 0
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): sm_sign$ = "-" ELSE sm_sign$ = ""
IF LEFT$(stringmathb$, 1) = "+" THEN IF sm_sign$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 2) ELSE stringmathb$ = "invalid number": EXIT DO
IF INSTR(UCASE$(stringmathb$), "D") OR INSTR(UCASE$(stringmathb$), "E") THEN ' Evaluate for Scientific Notation.
FOR sm_i& = 1 TO LEN(stringmathb$)
validatenum$ = MID$(UCASE$(stringmathb$), sm_i&, 1)
SELECT CASE validatenum$
CASE "+"
IF vsn_depresent& THEN vsn_poscnt& = vsn_poscnt& + 1 ELSE stringmathb$ = "invalid number": EXIT DO
CASE "-"
IF vsn_depresent& THEN vsn_negcnt& = vsn_negcnt& + 1 ELSE stringmathb$ = "invalid number": EXIT DO
CASE "0" TO "9"
vsn_numberpresent& = -1
CASE "D", "E"
vsn_depresent& = vsn_depresent& + 1
IF decimalcnt& = 0 AND sm_i& <> 2 OR vsn_depresent& > 1 OR vsn_numberpresent& = 0 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& = 1 AND vsn_poscnt& >= 1 THEN vsn_numberpresent& = 0: EXIT FOR
vsn_numberpresent& = 0
MID$(stringmathb$, sm_i&, 1) = "e" ' Standardize
CASE "."
decimalcnt& = decimalcnt& + 1
IF sm_i& <> 2 THEN vsn_numberpresent& = 0: EXIT FOR
CASE ELSE
vsn_numberpresent& = 0: EXIT FOR
END SELECT
NEXT
IF decimalcnt& = 0 THEN stringmathb$ = MID$(stringmathb$, 1, 1) + "." + MID$(stringmathb$, 2) ' Standardize "."
IF vsn_numberpresent& = 0 OR vsn_negcnt& = 1 AND vsn_poscnt& = 1 OR decimalcnt& > 1 OR INSTR(stringmathb$, ".") <> 2 THEN stringmathb$ = "invalid number": EXIT DO
vsn_depresent& = INSTR(stringmathb$, "e")
sm_x$ = MID$(stringmathb$, vsn_depresent& + 1, 1) ' Standardize exponent "+" these two lines.
IF sm_x$ <> "+" AND sm_x$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 1, vsn_depresent&) + "+" + MID$(stringmathb$, vsn_depresent& + 1)
IF MID$(stringmathb$, vsn_depresent& + 2, 1) = "0" THEN
IF MID$(stringmathb$, vsn_depresent& + 3, 1) <> "" THEN stringmathb$ = "invalid number": EXIT DO ' No leading zeros allowed in exponent notation.
END IF
jjed& = INSTR(stringmathb$, "e") ' Get position of notation.
valexpside$ = MID$(stringmathb$, jjed&) ' These two lines break up into number and notation
stringmathb$ = MID$(stringmathb$, 1, jjed& - 1) ' stringmathb$ is +- single digit whole number, decimal point and decimal number. valexpside$ is notation, sign and exponent.
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Remove any trailing zeros for number. Example 1.0d3 or 1.0000d3, etc.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
IF VAL(MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1)) = 0 THEN
IF RIGHT$(stringmathb$, 1) = "." THEN
stringmathb$ = "0.e+0" ' Handles all types of zero entries.
ELSE
stringmathb$ = "invalid number": EXIT DO
END IF
EXIT DO
END IF
stringmathb$ = sm_sign$ + stringmathb$ + valexpside$
EXIT DO
ELSE
FOR sm_i& = 1 TO LEN(stringmathb$)
validatenum$ = MID$(stringmathb$, sm_i&, 1)
SELECT CASE validatenum$
CASE "."
decimalcnt& = decimalcnt& + 1
CASE "0"
vsn_zerospresent& = -1
CASE "1" TO "9"
vsn_numberpresent& = -1
CASE "$"
CASE ELSE
stringmathb$ = "invalid number": EXIT DO
END SELECT
NEXT
IF decimalcnt& > 1 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& >= 1 AND vsn_poscnt& >= 1 THEN
stringmathb$ = "invalid number": EXIT DO
END IF
REM IF INSTR(stringmathb$, "$") THEN GOSUB currency_validate
REM IF INSTR(stringmathb$, ",") THEN
REM GOSUB comma_validation
REM IF stringmathb$ = "invalid number" THEN exit do
REM GOSUB comma_removal
REM END IF
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
DO UNTIL LEFT$(stringmathb$, 1) <> "0" ' Strip off any leading zeros.
stringmathb$ = MID$(stringmathb$, 2)
LOOP
stringmathb$ = sm_sign$ + stringmathb$
IF INSTR(stringmathb$, ".") THEN
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Strip off any trailing zeros in a decimal.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
END IF
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
IF vsn_numberpresent& = 0 THEN
IF vsn_zerospresent& THEN
stringmathb$ = "0"
ELSE
stringmathb$ = "invalid number"
END IF
END IF
END IF
EXIT DO
LOOP
END SUB
Pete
Posts: 99
Threads: 3
Joined: Apr 2022
Reputation:
10
08-18-2022, 06:48 PM
(This post was last modified: 08-18-2022, 08:03 PM by JRace.)
Re sqr(78):
Wolfram Alpha says it's 8.8317608663278468547640427269592539641746394809314178262102029725...
which matches your string math all the way out.
The QB64 value just seems to have an limit-of-precision error due to where calculation stopped before the result was converted to decimal.
QBasic agrees with QB64, while GWBasic sez 8.831760406494141, so GWB is only calculating at single-precision.
(Edited to add: TurboBasic (DOS), FreeBasic, TDM GCC, and Tiny C also agree with QB64 so yeah, it's a double-precision issue.)
Posts: 1,616
Threads: 157
Joined: Apr 2022
Reputation:
77
08-21-2022, 09:37 PM
(This post was last modified: 08-22-2022, 02:30 AM by Pete.)
Okay math fans... How about the square root of 2 to 5,000 places in under a minute...
Code: (Select All) WIDTH 160, 42
_SCREENMOVE 0, 0
DO
limit&& = 5000 ' Set to something smaller like 128 for instant results.
'betatest% = -1
IF betatest% THEN limit&& = 16
DO
INPUT "Number: "; x$: PRINT
IF x$ = "" THEN SYSTEM
IF LEFT$(x$, 1) = "-" THEN
PRINT "Negatives not allowed. Redo..": _DELAY 2: PRINT
ELSE
validate_string x$
IF INSTR(x$, "invalid") = 0 THEN EXIT DO
PRINT "Sorry, "; x$: _DELAY 1: PRINT
END IF
LOOP
x# = VAL(x$) ' Needed for QB64 SQR() comparison only.
oldy$ = ""
IF INSTR(x$, ".") THEN
decx$ = MID$(x$, 1, INSTR(x$, ".") - 1)
x$ = MID$(x$, 1, INSTR(x$, ".") - 1) + MID$(x$, INSTR(x$, ".") + 1)
IF LEN(x$) = 1 THEN x$ = x$ + "0"
ELSE
decx$ = x$
END IF
j&& = LEN(decx$)
' VAL() okay, one character eval.
IF VAL(RIGHT$(LTRIM$(STR$(j&&)), 1)) / 2 = VAL(RIGHT$(LTRIM$(STR$(j&&)), 1)) \ 2 THEN
i&& = 1 ' Even number length.
ELSE
i&& = 0 ' Odd number length.
END IF
DO
stringmatha$ = z$: stringmathb$ = k$
string_math z$, "-", k$, runningtotal$, terminating_decimal%, limit&&
z$ = runningtotal$ + (MID$(x$, i&&, 2))
IF LEFT$(z$, 1) = "0" THEN z$ = MID$(z$, 2) ' Remove leading zeros
oldy$ = ""
FOR j&& = 1 TO 10
IF i&& > 1 THEN
string_math sqrt$, "*", "2", y$, terminating_decimal%, limit&&
y$ = y$ + LTRIM$(STR$(j&&))
ELSE
y$ = LTRIM$(STR$(j&&))
END IF
string_math y$, "*", LTRIM$(STR$(j&&)), runningtotal$, terminating_decimal%, limit&&
string_compare runningtotal$, z$, gl%
IF gl% > -1 THEN
IF gl% = 0 THEN
h% = 0: oldy$ = y$ ' Perfect square division.
ELSE
h% = 1
END IF
string_math oldy$, "*", LTRIM$(STR$(j&& - h%)), runningtotal$, terminating_decimal%, limit&&
IF STRING$(LEN(z$), "0") = z$ AND runningtotal$ = "0" AND i&& >= LEN(decx$) THEN EXIT DO
IF dp&& = 0 THEN ' Limited to && size unless converted to string.
IF i&& >= LEN(decx$) THEN
dp&& = INT(LEN(decx$) / 2 + .5)
IF dp&& = 0 THEN dp&& = -1
END IF
END IF
IF betatest% THEN PRINT "Sqrt "; sqrt$; " * 2 = ";: COLOR 2, 0: PRINT LTRIM$(STR$(VAL(sqrt$) * 2));: COLOR 7, 0: PRINT LTRIM$(STR$(j&& - h%)); " * "; LTRIM$(STR$(j&& - h%)); " ="; VAL(oldy$) * (j&& - h%)
sqrt$ = sqrt$ + LTRIM$(STR$(j&& - h%))
string_math oldy$, "*", LTRIM$(STR$(j&& - h%)), runningtotal$, terminating_decimal%, limit&&
k$ = runningtotal$
IF betatest% THEN PRINT "Remainder "; z$; " minus "; k$; " = ";
EXIT FOR
END IF
oldy$ = y$
NEXT
IF betatest% THEN
string_math stringmatha$, "-", stringmathb$, runningtotal$, terminating_decimal%, limit&&
PRINT runningtotal$; " sqrt = "; sqrt$
END IF
i&& = i&& + 2
IF LEN(z$) >= limit&& THEN EXIT DO
x$ = x$ + "00"
LOOP
PRINT
IF dp&& THEN
sqrt$ = MID$(sqrt$, 0, dp&& + 1) + "." + MID$(sqrt$, dp&& + 1)
END IF
_CLIPBOARD$ = sqrt$
PRINT "QB64 SQR:"; SQR(x#)
PRINT "Pete SQR: "; sqrt$: _DELAY 1: CLEAR
PRINT
LOOP
SUB string_math (stringmatha$, operator$, stringmathb$, runningtotal$, terminating_decimal%, limit&&)
DIM AS _INTEGER64 a, b, c, aa, bb, cc, s, ss
a1$ = stringmatha$: b1$ = stringmathb$
SELECT CASE operator$
CASE "+", "-"
GOTO string_add_subtract_new
CASE "*"
GOTO string_multiply_new
CASE "/"
GOTO string_divide
CASE ELSE
PRINT "Error, no operator selected. operator$ = "; operator$
END SELECT
string_divide:
terminating_decimal% = 0: divsign% = 0: divremainder& = 0: divremainder$ = "": divplace& = 0: divplace2& = 0: quotient$ = "": divcarry& = 0
operationdivision% = -1
divbuffer& = LEN(stringmathb$) - LEN(stringmatha$)
IF divbuffer& < 0 THEN divbuffer& = 0
d2dividend$ = stringmatha$
d1divisor$ = stringmathb$
IF LEFT$(d1divisor$, 1) = "0" AND LEN(d1divisor$) = 1 THEN PRINT "Division by zero not allowed.": divsign% = 0: operationdivision% = 0: EXIT SUB
IF LEFT$(d1divisor$, 1) = "-" THEN divsign% = -1: d1divisor$ = MID$(d1divisor$, 2)
IF LEFT$(d2dividend$, 1) = "-" THEN
IF divsign% THEN
divsign% = 0
ELSE
divsign% = -1
END IF
d2dividend$ = MID$(d2dividend$, 2)
END IF
IF INSTR(d1divisor$, ".") <> 0 THEN
DO UNTIL RIGHT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 1, LEN(d1divisor$) - 1) ' Strip off trailing zeros
LOOP
divplace& = LEN(d1divisor$) - INSTR(d1divisor$, ".")
d1divisor$ = MID$(d1divisor$, 1, INSTR(d1divisor$, ".") - 1) + MID$(d1divisor$, INSTR(d1divisor$, ".") + 1) ' Strip off decimal point.
DO UNTIL LEFT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 2) ' Strip off leading zeros for divisors smaller than .1
LOOP
END IF
IF INSTR(d2dividend$, ".") <> 0 THEN
d2dividend$ = d2dividend$ + STRING$(divplace& - LEN(d2dividend$) - INSTR(d2dividend$, "."), "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace2& = INSTR(d2dividend$, ".")
DO UNTIL RIGHT$(d2dividend$, 1) <> "0"
d2dividend$ = MID$(d2dividend$, 1, LEN(d2dividend$) - 1) ' Strip off trailing zeros
LOOP
d2dividend$ = MID$(d2dividend$, 1, INSTR(d2dividend$, ".") - 1) + MID$(d2dividend$, INSTR(d2dividend$, ".") + 1) ' Strip off decimal point.
ELSE
d2dividend$ = d2dividend$ + STRING$(divplace&, "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace& = 0
END IF
DO
DO
divremainder& = divremainder& + 1: divremainder$ = divremainder$ + MID$(d2dividend$, divremainder&, 1)
IF MID$(d2dividend$, divremainder&, 1) = "" THEN
IF divremainder$ = STRING$(LEN(divremainder$), "0") AND LEN(quotient$) > LEN(d2dividend$) THEN
divflag% = -1
terminating_decimal% = -1
EXIT DO
END IF
divcarry& = divcarry& + 1
IF divcarry& = 1 THEN divplace3& = divremainder& - 1
IF divcarry& > limit&& + 1 + divbuffer& THEN
divflag% = -2: EXIT DO
END IF
divremainder$ = divremainder$ + "0" ' No more digits to bring down.
END IF
IF LEN(divremainder$) > LEN(d1divisor$) OR LEN(divremainder$) = LEN(d1divisor$) AND divremainder$ >= d1divisor$ THEN EXIT DO
quotient$ = quotient$ + "0"
LOOP
IF divflag% THEN divflag% = 0: EXIT DO
FOR div_i% = 9 TO 1 STEP -1
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply_new
tempcutd$ = divremainder$ ' divremainder$ can be 00 or other leading zero values.
DO
IF LEN(tempcutd$) = 1 THEN EXIT DO
IF LEFT$(tempcutd$, 1) = "0" THEN
tempcutd$ = MID$(tempcutd$, 2)
ELSE
EXIT DO
END IF
LOOP
IF LEN(tempcutd$) > LEN(m_product$) OR LEN(tempcutd$) = LEN(m_product$) AND m_product$ <= tempcutd$ THEN EXIT FOR
NEXT
quotient$ = quotient$ + LTRIM$(STR$(div_i%))
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply_new
operator$ = "-"
stringmatha$ = divremainder$
stringmathb$ = m_product$
GOSUB string_add_subtract_new
divremainder$ = stringmatha$
operator$ = "/"
LOOP
IF divplace& = 0 AND divplace2& = 0 THEN divplace& = divplace3&
IF divplace2& THEN divplace& = divplace& + divplace2& - 1
IF quotient$ = "" THEN divplace& = 0 ' dividend is zero.
IF divplace& OR divplace2& THEN
quotient$ = MID$(quotient$, 1, divplace&) + "." + MID$(quotient$, divplace& + 1)
DO UNTIL RIGHT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off trailing zeros
LOOP
IF RIGHT$(quotient$, 1) = "." THEN quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off abandoned decimal.
END IF
DO UNTIL LEFT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 2) ' Strip off leading zeros
LOOP
IF quotient$ = "" THEN quotient$ = "0": divsign% = 0
operationdivision% = 0
stringmathb$ = quotient$: quotient$ = ""
IF stringmathb$ = "overflow" THEN divsign% = 0: operationdivision% = 0: EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF divsign% THEN runningtotal$ = "-" + runningtotal$
IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
operationdivision% = 0
EXIT SUB
'------------------------------------------------------------------------
string_add_subtract_new:
s = 18
a$ = stringmatha$: b$ = stringmathb$: op$ = operator$
IF op$ = "-" THEN
IF LEFT$(b$, 1) = "-" THEN b$ = MID$(b$, 2) ELSE b$ = "-" + b$
END IF
IF INSTR(a$, ".") <> 0 OR INSTR(b$, ".") <> 0 THEN
decimal% = -1
IF INSTR(a$, ".") <> 0 THEN
dec_a&& = LEN(MID$(a$, INSTR(a$, ".") + 1))
a$ = MID$(a$, 1, INSTR(a$, ".") - 1) + MID$(a$, INSTR(a$, ".") + 1)
END IF
IF INSTR(b$, ".") <> 0 THEN
dec_b&& = LEN(MID$(b$, INSTR(b$, ".") + 1))
b$ = MID$(b$, 1, INSTR(b$, ".") - 1) + MID$(b$, INSTR(b$, ".") + 1)
END IF
' Line up decimal places by inserting trailing zeros.
IF dec_b&& > dec_a&& THEN
j&& = dec_b&&
a$ = a$ + STRING$(dec_b&& - dec_a&&, "0")
ELSE
j&& = dec_a&&
b$ = b$ + STRING$(dec_a&& - dec_b&&, "0")
END IF
END IF
IF LEFT$(a$, 1) = "-" OR LEFT$(b$, 1) = "-" THEN
IF LEFT$(a$, 1) = "-" AND LEFT$(b$, 1) = "-" THEN
sign$ = "--": a$ = MID$(a$, 2): b$ = MID$(b$, 2)
ELSE
IF LEFT$(a$, 1) = "-" THEN a$ = MID$(a$, 2): sign_a$ = "-"
IF LEFT$(b$, 1) = "-" THEN b$ = MID$(b$, 2): sign_b$ = "-"
IF LEFT$(a1$, 1) = "-" THEN a1_x$ = MID$(a1$, 2) ELSE a1_x$ = a1$
IF LEFT$(b1$, 1) = "-" THEN b1_x$ = MID$(b1$, 2) ELSE b1_x$ = b1$
string_compare a1_x$, b1_x$, gl%
IF gl% < 0 THEN
IF LEN(sign_b$) THEN sign$ = "-": SWAP a$, b$
ELSE
IF LEN(sign_a$) THEN sign$ = "-": SWAP sign_a$, sign_b$
END IF
END IF
END IF
s = 18: z$ = ""
DO
i&& = i&& + s
x1$ = MID$(a$, LEN(a$) - i&& + 1, s)
x2$ = MID$(b$, LEN(b$) - i&& + 1, s)
a = VAL(sign_a$ + x1$) + VAL(sign_b$ + x2$) + c
IF x1$ + x2$ = "" AND c = 0 THEN EXIT DO
c = 0
IF a > VAL(STRING$(s, "9")) THEN a = a - 10 ^ s: c = 1
IF a < 0 THEN a = a + 10 ^ s: c = -1
tmp$ = LTRIM$(STR$(a))
z$ = STRING$(LEN(x1$) - LEN(tmp$), "0") + tmp$ + z$
LOOP
IF decimal% THEN
z$ = MID$(z$, 1, LEN(z$) - j&&) + "." + MID$(z$, LEN(z$) - j&& + 1)
END IF
' Remove any leading zeros.
DO
IF LEFT$(z$, 1) = "0" THEN z$ = MID$(z$, 2) ELSE EXIT DO
LOOP
IF z$ = "" OR z$ = "0" THEN z$ = "0" ELSE z$ = LEFT$(sign$, 1) + z$
runningtotal$ = z$ '*'
sign$ = "": sign_a$ = "": sign_b$ = "": i&& = 0: j&& = 0: decimal% = 0: c = 0
EXIT SUB
'------------------------------------------------------------------------
string_multiply_new:
z$ = "": sign$ = "": mult&& = 0: h&& = 0: i&& = 0: j&& = 0: c = 0: decimal% = 0
zz$ = "": ii&& = 0: jj&& = 0
s = 8: ss = 18
a$ = stringmatha$: b$ = stringmathb$
IF INSTR(a$, "-") <> 0 OR INSTR(b$, "-") <> 0 THEN
IF INSTR(a$, "-") <> 0 AND INSTR(b$, "-") <> 0 THEN
a$ = MID$(a$, 2): b$ = MID$(b$, 2)
ELSE
IF INSTR(a$, "-") <> 0 THEN a$ = MID$(a$, 2) ELSE b$ = MID$(b$, 2)
sign$ = "-"
END IF
END IF
IF INSTR(a$, ".") <> 0 OR INSTR(b$, ".") <> 0 THEN
decimal% = -1
IF INSTR(a$, ".") <> 0 THEN
dec_a&& = LEN(MID$(a$, INSTR(a$, ".") + 1))
a$ = MID$(a$, 1, INSTR(a$, ".") - 1) + MID$(a$, INSTR(a$, ".") + 1)
END IF
IF INSTR(b$, ".") <> 0 THEN
dec_b&& = LEN(MID$(b$, INSTR(b$, ".") + 1))
b$ = MID$(b$, 1, INSTR(b$, ".") - 1) + MID$(b$, INSTR(b$, ".") + 1)
END IF
END IF
IF LEN(a$) < LEN(b$) THEN SWAP a$, b$
DO
h&& = h&& + s: i&& = 0
x2$ = MID$(b$, LEN(b$) - h&& + 1, s)
WHILE -1
i&& = i&& + s
x1$ = MID$(a$, LEN(a$) - i&& + 1, s)
a = VAL(sign_a$ + x1$) * VAL(sign_b$ + x2$) + c
IF betatest% THEN PRINT "x1$ = "; x1$;: LOCATE , 20: PRINT "x2$ = "; x2$;: LOCATE , 35: PRINT VAL(x1$) * VAL(x2$) + c;: LOCATE , 55: PRINT "c = "; c;: LOCATE , 75: PRINT "val = "; a,
c = 0
tmp$ = LTRIM$(STR$(a))
IF LEN(tmp$) > s THEN c = VAL(MID$(tmp$, 1, LEN(tmp$) - s)): tmp$ = MID$(tmp$, LEN(tmp$) - s + 1)
z$ = STRING$(LEN(x1$) - LEN(tmp$), "0") + tmp$ + z$
IF betatest% THEN LOCATE , 100: PRINT a;: LOCATE , 120: PRINT z$
IF i&& >= LEN(a$) AND c = 0 THEN EXIT WHILE
WEND
jj&& = jj&& + 1
IF jj&& > 1 THEN
ii&& = 0: cc = 0
aa$ = holdaa$
bb$ = z$ + STRING$((jj&& - 1) * s, "0")
IF betatest% THEN PRINT "aa$ "; aa$; " + bb$ "; z$;: COLOR 14, 0: PRINT STRING$(jj&& - 1, "0"); " = ";: COLOR 7, 0: SLEEP
DO
ii&& = ii&& + ss
xx1$ = MID$(aa$, LEN(aa$) - ii&& + 1, ss)
xx2$ = MID$(bb$, LEN(bb$) - ii&& + 1, ss)
aa = VAL(xx1$) + VAL(xx2$) + cc
IF xx1$ + xx2$ = "" AND cc = 0 THEN EXIT DO ' Prevents leading zeros.
cc = 0
IF aa > VAL(STRING$(ss, "9")) THEN aa = aa - 10 ^ ss: cc = 1
tmp$ = LTRIM$(STR$(aa))
zz$ = STRING$(LEN(xx1$) - LEN(tmp$), "0") + tmp$ + zz$
LOOP
DO WHILE LEFT$(zz$, 1) = "0"
IF LEFT$(zz$, 1) = "0" THEN zz$ = MID$(zz$, 2)
LOOP
IF zz$ = "" THEN zz$ = "0"
holdaa$ = zz$
IF betatest% THEN COLOR 2, 0: PRINT holdaa$: COLOR 7, 0
ELSE
holdaa$ = z$ + STRING$(jj&& - 1, "0")
END IF
z$ = "": zz$ = ""
LOOP UNTIL h&& >= LEN(b$)
z$ = holdaa$
IF decimal% THEN
DO UNTIL LEN(z$) >= dec_a&& + dec_b&&
z$ = "0" + z$
LOOP
z$ = MID$(z$, 0, LEN(z$) - (dec_a&& + dec_b&& - 1)) + "." + MID$(z$, LEN(z$) - (dec_a&& + dec_b&&) + 1)
DO UNTIL RIGHT$(z$, 1) <> "0" AND RIGHT$(z$, 1) <> "."
z$ = MID$(z$, 1, LEN(z$) - 1)
LOOP
END IF
IF z$ = "" OR z$ = "0" THEN z$ = "0": ELSE z$ = sign$ + z$
decimal% = 0: sign$ = ""
runningtotal$ = z$
EXIT SUB
replace_decimal:
IF addsubplace& THEN
addsubx1$ = STRING$(addsubplace& - LEN(addsubx1$), "0") + addsubx1$
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - addsubplace&) + "." + MID$(addsubx1$, LEN(addsubx1$) - addsubplace& + 1)
DO UNTIL RIGHT$(addsubx1$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1)
addsubplace& = addsubplace& - 1
LOOP
IF RIGHT$(addsubx1$, 1) = "." THEN addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1) ' Number is now an integer.
END IF
RETURN
string_comp:
DO
' Remove trailing zeros after a decimal point.
IF INSTR(acomp$, ".") THEN
DO UNTIL RIGHT$(acomp$, 1) <> "0" AND RIGHT$(acomp$, 1) <> "." AND RIGHT$(acomp$, 1) <> "-"
acomp$ = MID$(acomp$, 1, LEN(acomp$) - 1)
LOOP
END IF
IF INSTR(bcomp$, ".") THEN
DO UNTIL RIGHT$(bcomp$, 1) <> "0" AND RIGHT$(bcomp$, 1) <> "." AND RIGHT$(bcomp$, 1) <> "-"
bcomp$ = MID$(bcomp$, 1, LEN(bcomp$) - 1)
LOOP
END IF
IF MID$(acomp$, 1, 2) = "-0" OR acomp$ = "" OR acomp$ = "-" THEN acomp$ = "0"
IF MID$(bcomp$, 1, 2) = "-0" OR bcomp$ = "" OR bcomp$ = "-" THEN bcomp$ = "0"
' A - and +
IF LEFT$(acomp$, 1) = "-" THEN j% = -1
IF LEFT$(bcomp$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(acomp$, ".")
k% = INSTR(bcomp$, ".")
IF j% = 0 AND k% THEN
IF acomp$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF bcomp$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF acomp$ > bcomp$ THEN
gl% = 1
ELSEIF acomp$ = bcomp$ THEN gl% = 0
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(acomp$)
CASE IS < LEN(bcomp$)
gl% = -1
CASE IS = LEN(bcomp$)
IF acomp$ = bcomp$ THEN
gl% = 0
ELSEIF acomp$ > bcomp$ THEN gl% = 1
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
CASE IS > LEN(bcomp$)
gl% = 1
END SELECT
EXIT DO
LOOP
RETURN
END SUB
SUB string_compare (compa$, compb$, gl%)
DO
' Remove trailing zeros after a decimal point.
IF INSTR(compa$, ".") THEN
DO UNTIL RIGHT$(compa$, 1) <> "0" AND RIGHT$(compa$, 1) <> "." AND RIGHT$(compa$, 1) <> "-"
compa$ = MID$(compa$, 1, LEN(compa$) - 1)
LOOP
END IF
IF INSTR(compb$, ".") THEN
DO UNTIL RIGHT$(compb$, 1) <> "0" AND RIGHT$(compb$, 1) <> "." AND RIGHT$(compb$, 1) <> "-"
compb$ = MID$(compb$, 1, LEN(compb$) - 1)
LOOP
END IF
IF MID$(compa$, 1, 2) = "-0" OR compa$ = "" OR compa$ = "-" THEN compa$ = "0"
IF MID$(compb$, 1, 2) = "-0" OR compb$ = "" OR compb$ = "-" THEN compb$ = "0"
' A - and +
IF LEFT$(compa$, 1) = "-" THEN j% = -1
IF LEFT$(compb$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: PRINT "1*": EXIT DO
IF j% = 0 AND k% THEN gl% = 1: PRINT "2*": EXIT DO
' A decimal and non-decimal.
j% = INSTR(compa$, ".")
k% = INSTR(compb$, ".")
IF j% = 0 AND k% THEN
IF compa$ = "0" THEN gl% = -1: PRINT "4*" ELSE gl% = 1: PRINT "5*"
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF compb$ = "0" THEN gl% = 1: PRINT "6*" ELSE gl% = -1: PRINT "7*"
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF compa$ > compb$ THEN
gl% = 1: PRINT "8*"
ELSEIF compa$ = compb$ THEN gl% = 0: PRINT "9*"
ELSEIF compa$ < compb$ THEN gl% = -1: PRINT "10*"
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(compa$)
CASE IS < LEN(compb$)
gl% = -1
CASE IS = LEN(compb$)
IF compa$ = compb$ THEN
gl% = 0
ELSEIF compa$ > compb$ THEN gl% = 1
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
CASE IS > LEN(compb$)
gl% = 1
END SELECT
EXIT DO
LOOP
END SUB
SUB validate_string (stringmathb$)
DO ' Faux loop.
vsn_negcnt& = 0: vsn_poscnt& = 0: vsn_depresent& = 0: decimalcnt& = 0: vsn_numberpresent& = 0: vsn_zerospresent& = 0
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): sm_sign$ = "-" ELSE sm_sign$ = ""
IF LEFT$(stringmathb$, 1) = "+" THEN IF sm_sign$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 2) ELSE stringmathb$ = "invalid number": EXIT DO
IF INSTR(UCASE$(stringmathb$), "D") OR INSTR(UCASE$(stringmathb$), "E") THEN ' Evaluate for Scientific Notation.
FOR sm_i& = 1 TO LEN(stringmathb$)
validatenum$ = MID$(UCASE$(stringmathb$), sm_i&, 1)
SELECT CASE validatenum$
CASE "+"
IF vsn_depresent& THEN vsn_poscnt& = vsn_poscnt& + 1 ELSE stringmathb$ = "invalid number": EXIT DO
CASE "-"
IF vsn_depresent& THEN vsn_negcnt& = vsn_negcnt& + 1 ELSE stringmathb$ = "invalid number": EXIT DO
CASE "0" TO "9"
vsn_numberpresent& = -1
CASE "D", "E"
vsn_depresent& = vsn_depresent& + 1
IF decimalcnt& = 0 AND sm_i& <> 2 OR vsn_depresent& > 1 OR vsn_numberpresent& = 0 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& = 1 AND vsn_poscnt& >= 1 THEN vsn_numberpresent& = 0: EXIT FOR
vsn_numberpresent& = 0
MID$(stringmathb$, sm_i&, 1) = "e" ' Standardize
CASE "."
decimalcnt& = decimalcnt& + 1
IF sm_i& <> 2 THEN vsn_numberpresent& = 0: EXIT FOR
CASE ELSE
vsn_numberpresent& = 0: EXIT FOR
END SELECT
NEXT
IF decimalcnt& = 0 THEN stringmathb$ = MID$(stringmathb$, 1, 1) + "." + MID$(stringmathb$, 2) ' Standardize "."
IF vsn_numberpresent& = 0 OR vsn_negcnt& = 1 AND vsn_poscnt& = 1 OR decimalcnt& > 1 OR INSTR(stringmathb$, ".") <> 2 THEN stringmathb$ = "invalid number": EXIT DO
vsn_depresent& = INSTR(stringmathb$, "e")
sm_x$ = MID$(stringmathb$, vsn_depresent& + 1, 1) ' Standardize exponent "+" these two lines.
IF sm_x$ <> "+" AND sm_x$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 1, vsn_depresent&) + "+" + MID$(stringmathb$, vsn_depresent& + 1)
IF MID$(stringmathb$, vsn_depresent& + 2, 1) = "0" THEN
IF MID$(stringmathb$, vsn_depresent& + 3, 1) <> "" THEN stringmathb$ = "invalid number": EXIT DO ' No leading zeros allowed in exponent notation.
END IF
jjed& = INSTR(stringmathb$, "e") ' Get position of notation.
valexpside$ = MID$(stringmathb$, jjed&) ' These two lines break up into number and notation
stringmathb$ = MID$(stringmathb$, 1, jjed& - 1) ' stringmathb$ is +- single digit whole number, decimal point and decimal number. valexpside$ is notation, sign and exponent.
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Remove any trailing zeros for number. Example 1.0d3 or 1.0000d3, etc.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
IF VAL(MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1)) = 0 THEN
IF RIGHT$(stringmathb$, 1) = "." THEN
stringmathb$ = "0.e+0" ' Handles all types of zero entries.
ELSE
stringmathb$ = "invalid number": EXIT DO
END IF
EXIT DO
END IF
stringmathb$ = sm_sign$ + stringmathb$ + valexpside$
EXIT DO
ELSE
FOR sm_i& = 1 TO LEN(stringmathb$)
validatenum$ = MID$(stringmathb$, sm_i&, 1)
SELECT CASE validatenum$
CASE "."
decimalcnt& = decimalcnt& + 1
CASE "0"
vsn_zerospresent& = -1
CASE "1" TO "9"
vsn_numberpresent& = -1
CASE "$"
CASE ELSE
stringmathb$ = "invalid number": EXIT DO
END SELECT
NEXT
IF decimalcnt& > 1 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& >= 1 AND vsn_poscnt& >= 1 THEN
stringmathb$ = "invalid number": EXIT DO
END IF
REM IF INSTR(stringmathb$, "$") THEN GOSUB currency_validate
REM IF INSTR(stringmathb$, ",") THEN
REM GOSUB comma_validation
REM IF stringmathb$ = "invalid number" THEN exit do
REM GOSUB comma_removal
REM END IF
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
DO UNTIL LEFT$(stringmathb$, 1) <> "0" ' Strip off any leading zeros.
stringmathb$ = MID$(stringmathb$, 2)
LOOP
stringmathb$ = sm_sign$ + stringmathb$
IF INSTR(stringmathb$, ".") THEN
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Strip off any trailing zeros in a decimal.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
END IF
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
IF vsn_numberpresent& = 0 THEN
IF vsn_zerospresent& THEN
stringmathb$ = "0"
ELSE
stringmathb$ = "invalid number"
END IF
END IF
END IF
EXIT DO
LOOP
END SUB
|
