Posts: 1,507
Threads: 160
Joined: Apr 2022
Reputation:
116
Since this is string math, I think you guys are overlooking one obvious thing.
Let's take 1/3 for an example -- the answer is "0.33..."
See that "..." at the end there? That tells you that you're dealing with a repeating fraction, Without it, you're just dealing with 0.33. You don't need to go looking for a repeating pattern; just make certain to assign those "..." to the end of your results, and then if you need to reverse engineer the answer, you can easily do so without having to look for a repeating pattern which may or may not be there. "0.33" could be 1/3 rounded to 2 digits, or it could just be 33/100.
Since you're not just doing numeric-math, but are instead doing full fledged string-manipulation, why not give meaningful results with your string answer which holds more information than just numbers can provide?
I'd suggest a simple "...##" approach, where "..." represents something repeating, and "##" represents how many digits before the repetition. With such a method, 1/3 is "0.3...1" -- with one glance you can tell that you have one repeating digit, and it's the 3. From there you can do your reverse magic mumbo jumbo if you need to, to turn it back into 1/3, and then you can process it from there.
1/3 = 0..3...1
0.3...1 * 0.3...1 = (1/3) * (1/3) = (1/9)
Posts: 1,616
Threads: 157
Joined: Apr 2022
Reputation:
77
No way is Sam going down that rabbit hole. Multiplying fractions works, period. Determining when a repetend is no longer a repetend can get a bit tricky, and even if you made an iron clad system, you will still have accuracy problems with calculations that produce a tremendous amount of digits without repeating. Those can only be accurately used in other calculations when in fraction form.
Pete
Posts: 336
Threads: 24
Joined: Apr 2022
Reputation:
19
I think Steve's idea has merit but it would take some getting used to, it reminds me of continued fractions
Posts: 1,616
Threads: 157
Joined: Apr 2022
Reputation:
77
The trouble is to use Steve's method requires the algorithm that recognizes a terminating decimal from a repetend. I made one, but since you can have fairly small fractions result in repetends of approx. 10,000 digits before they repeat, you'd waste a lot of computer time running that analysis. It is faster to just calculate both the numerator and denominator and display the results as a decimal. That's the road I took in the code posted in this thread.
Pete
If eggs are brain food, Biden takes his scrambled.
Posts: 1,616
Threads: 157
Joined: Apr 2022
Reputation:
77
08-12-2022, 01:56 AM
(This post was last modified: 08-14-2022, 11:05 AM by Pete.)
Okay, here is the latest demo update for the various string functions. Please see the first post if you are interested in trying out the string calculator in progress.
Code: (Select All) DIM SHARED limit&&, betatest%
limit&& = 50: betatest% = -1
REM Demo
PRINT
PRINT " 1) Turn a fraction into a decimal."
PRINT " 2) Turn a decimal into a fraction."
PRINT " 3) Compare string values."
PRINT " 4) Find the greatest common factor."
PRINT " 5) Convert to scientific notation."
PRINT " 6) Convert s.n. to number."
PRINT " 7) Round to last digit."
PRINT " 8) Identify decimal repetends."
PRINT " 9) Convert a repetend to a decimal."
PRINT " 0) Validate a string number."
PRINT
DO
_LIMIT 30
b$ = INKEY$
IF LEN(b$) THEN
IF b$ >= "0" AND b$ <= "9" THEN _DELAY .2: EXIT DO
IF b$ = CHR$(27) THEN SYSTEM
END IF
LOOP
SELECT CASE b$
CASE "1"
LINE INPUT "Numerator: "; num1$
LINE INPUT "Denominator: "; num2$
fraction_to_decimal num1$, num2$, limit&&
CASE "2"
LINE INPUT "Decimal: "; num1$
decimal_to_fraction num1$, numerator$, denominator$
CASE "3"
LINE INPUT "String Number 1: "; num1$
LINE INPUT "String Number 2: "; num2$
string_compare num1$, num2$
CASE "4"
LINE INPUT "Numerator: "; num1$
LINE INPUT "Denominator: "; num2$
greatest_common_factor num1$, num2$, limit&&
CASE "5"
LINE INPUT "Number to convert to s.n: "; num1$
number_to_scientific num1$
CASE "6"
LINE INPUT "S.N. to convert to numeric: "; num1$
scientific_to_number num1$
CASE "7"
LINE INPUT "Number to round: "; num1$
hold_limit&& = limit&&
limit&& = LEN(num1$) - 1
IF INSTR(num1$, ".") THEN limit&& = limit&& - 1
rounding num1$, limit&&
limit&& = hold_limit&&
CASE "8"
LINE INPUT "Numerator: "; num1$
LINE INPUT "Denominator: "; num2$
operator$ = "/"
string_math num1$, operator$, num2$, decimal$, limit&&
repetend_id decimal$, repetend$, repetend_pattern$, repetend_class$, display_as$, z$, mp%
CASE "9"
LINE INPUT "Input a repetend: "; num1$
repetend_to_decimal num1$
CASE "0"
LINE INPUT "Number to validate: "; num1$
validate_string num1$
END SELECT
SLEEP
CLS
RUN
SUB fraction_to_decimal (num1$, num2$, limit&&)
CALL string_math(num1$, "/", num2$, decimal$, limit&&)
IF betatest% THEN PRINT "Decimal = "; decimal$
END SUB
SUB decimal_to_fraction (decimal$, numerator$, denominator$)
IF MID$(decimal$, 1, 1) = "-" THEN j = 3 ELSE j = 2 ' Look for negative sign.
x1$ = MID$(decimal$, 1, INSTR(decimal$, ".") - 1)
IF j = 3 THEN x1$ = MID$(x1$, 2)
x2$ = MID$(decimal$, INSTR(decimal$, ".") + 1)
denominator$ = "1" + STRING$(LEN(x2$), "0")
x1$ = x1$ + x2$
DO UNTIL LEFT$(x1$, 1) <> "0"
x1$ = MID$(x1$, 2) ' Strip off any leading zeros
LOOP
IF j = 2 THEN numerator$ = x1$ ELSE numerator$ = "-" + x1$
greatest_common_factor numerator$, denominator$, limit&&
END SUB
SUB string_compare (compa$, compb$)
DO
REM Remove trailing zeros after a decimal point.
IF INSTR(compa$, ".") THEN
DO UNTIL RIGHT$(compa$, 1) <> "0" AND RIGHT$(compa$, 1) <> "." AND RIGHT$(compa$, 1) <> "-"
compa$ = MID$(compa$, 1, LEN(compa$) - 1)
LOOP
END IF
IF INSTR(compb$, ".") THEN
DO UNTIL RIGHT$(compb$, 1) <> "0" AND RIGHT$(compb$, 1) <> "." AND RIGHT$(compb$, 1) <> "-"
compb$ = MID$(compb$, 1, LEN(compb$) - 1)
LOOP
END IF
IF MID$(compa$, 1, 2) = "-0" OR compa$ = "" OR compa$ = "-" THEN compa$ = "0"
IF MID$(compb$, 1, 2) = "-0" OR compb$ = "" OR compb$ = "-" THEN compb$ = "0"
' A - and +
IF LEFT$(compa$, 1) = "-" THEN j% = -1
IF LEFT$(compb$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(compa$, ".")
k% = INSTR(compb$, ".")
IF j% = 0 AND k% THEN
IF compa$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF compb$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF compa$ > compb$ THEN
gl% = 1
ELSEIF compa$ = compb$ THEN gl% = 0
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(compa$)
CASE IS < LEN(compb$)
gl% = -1
CASE IS = LEN(compb$)
IF compa$ = compb$ THEN
gl% = 0
ELSEIF compa$ > compb$ THEN gl% = 1
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
CASE IS > LEN(compb$)
gl% = 1
END SELECT
EXIT DO
LOOP
IF betatest% THEN
PRINT
SELECT CASE gl%
CASE -1
PRINT "a$ < b$", compa$; " < "; compb$; " gl% = "; gl%
CASE 0
PRINT "a$ = b$", compa$; " = "; compb$; " gl% = "; gl%
CASE 1
PRINT "a$ > b$", compa$; " > "; compb$; " gl% = "; gl%
END SELECT
PRINT
END IF
END SUB
SUB greatest_common_factor (gfca$, gfcb$, limit&&)
IF betatest% THEN PRINT "Pre-GFC "; gfca$; " / "; gfcb$
numerator$ = gfca$: denominator$ = gfcb$
' Make both numbers positive.
IF MID$(gfca$, 1, 1) = "-" THEN gfca$ = MID$(gfca$, 2)
IF MID$(gfcb$, 1, 1) = "-" THEN gfcb$ = MID$(gfcb$, 2)
IF gfca$ < gfcb$ THEN SWAP gfca$, gfcb$
DO
stringmatha$ = gfca$: stringmathb$ = gfcb$
operator$ = "/": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
IF INSTR(runningtotal$, ".") THEN runningtotal$ = MID$(runningtotal$, 1, INSTR(runningtotal$, ".") - 1)
stringmatha$ = runningtotal$: stringmathb$ = gfcb$
operator$ = "*": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
stringmatha$ = gfca$: stringmathb$ = runningtotal$
operator$ = "-": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
SWAP gfca$, gfcb$: gfcb$ = runningtotal$
IF runningtotal$ = "0" THEN EXIT DO
LOOP
stringmatha$ = numerator$: stringmathb$ = gfca$
IF betatest% THEN PRINT "GFC = "; gfca$
operator$ = "/": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
numerator$ = runningtotal$
stringmatha$ = denominator$: stringmathb$ = gfca$
operator$ = "/": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
denominator$ = runningtotal$
IF betatest% THEN PRINT "Fraction: "; numerator$; " / "; denominator$
END SUB
SUB number_to_scientific (stringmathb$)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): n2sign$ = "-"
IF INSTR(stringmathb$, ".") = 0 THEN exponentvalue&& = LEN(stringmathb$) - 1 ELSE exponentvalue&& = INSTR(stringmathb$, ".") - 2 ' Exponent is one less than number of digits for whole number an two less than the placement of the decimal point for a fraction.
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1)
IF LEFT$(stringmathb$, 1) = "0" AND LEN(stringmathb$) > 1 OR exponentvalue&& = -1 THEN
DO UNTIL LEFT$(stringmathb$, 1) <> "0" ' Remove leading zeros to consider rounding.
stringmathb$ = MID$(stringmathb$, 2)
exponentvalue&& = exponentvalue&& - 1
LOOP
esign$ = "-"
ELSE
esign$ = "+"
END IF
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Remove trailing zeros.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
IF stringmathb$ = "" THEN stringmathb$ = "0": esign$ = "+": exponentvalue&& = 0
stringmathb$ = LEFT$(stringmathb$, 1) + "." + MID$(stringmathb$, 2)
IF stringmathb$ = "0." THEN n2sign$ = "": esign$ = "+"
stringmathb$ = stringmathb$ + "e" + esign$ + LTRIM$(STR$(ABS(exponentvalue&&))) ' S.N formed here.
IF stringmathb$ <> "overflow" THEN
stringmathb$ = n2sign$ + stringmathb$
END IF
n2sign$ = "": esign$ = "": exponentvalue&& = 0
IF betatest% THEN PRINT "S.N.: "; stringmathb$
END SUB
SUB scientific_to_number (stringmathb$)
stn_sign$ = "": stn_point$ = ""
IF INSTR(UCASE$(stringmathb$), "D") THEN MID$(stringmathb$, INSTR(UCASE$(stringmathb$), "D"), 1) = "e"
IF MID$(stringmathb$, INSTR(stringmathb$, "e") + 2) = "0" THEN ' The numeric value is the number without the zero exponent.
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, "e") - 1)
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
EXIT SUB
ELSE
IF LEFT$(stringmathb$, 1) = "-" THEN stn_sign$ = "-": stringmathb$ = MID$(stringmathb$, 2)
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Remove decimal point.
stn_i& = INSTR(stringmathb$, "e") - 1 ' Length of the numric part.
IF MID$(stringmathb$, INSTR(stringmathb$, "e") + 1, 1) = "-" THEN
stringmathb$ = "." + STRING$(VAL(MID$(stringmathb$, stn_i& + 3)) - 1, "0") + MID$(stringmathb$, 1, stn_i&) ' Decimal point followed by exponent value in zeros added in front of numeric part.
ELSE
IF stn_i& - 1 > VAL(MID$(stringmathb$, stn_i& + 3)) THEN stn_point$ = "." ' - 1 for decimal place. Ex 2.034d+2 is 2034 here where 3 places to the right . could be moved before . disappears. > so no trailing decimal results.
stringmathb$ = MID$(MID$(stringmathb$, 1, stn_i&), 1, VAL(MID$(stringmathb$, stn_i& + 3)) + 1) + stn_point$ + MID$(MID$(stringmathb$, 1, stn_i&), VAL(MID$(stringmathb$, stn_i& + 3)) + 2, stn_i& - VAL(MID$(stringmathb$, stn_i& + 3)) - 1) + STRING$(VAL(MID$(stringmathb$, stn_i& + 2)) - (stn_i& - 1), "0")
END IF
END IF
IF stringmathb$ = "0" THEN stn_sign$ = ""
stringmathb$ = stn_sign$ + stringmathb$
IF betatest% THEN PRINT "Number: "; stringmathb$
END SUB
SUB rounding (stringmathb$, limit&&)
IF LEN(stringmathb$) > limit&& AND INSTR(stringmathb$, ".") = 0 OR LEN(stringmathb$) > limit&& + 1 AND INSTR(stringmathb$, ".") <> 0 THEN
IF INSTR(stringmathb$, ".") = 0 THEN
stringmathb$ = MID$(stringmathb$, 1, limit&& + 1)
ELSE
stringmathb$ = MID$(stringmathb$, 1, limit&& + 2)
END IF
GOSUB string_rounding_method
IF LEN(stringmathb$) > limit&& + lrc_decimalpoint& THEN ' Ex: limit&& = 4 9999.9 1.e+4
CALL number_to_scientific(stringmathb$)
ELSE
IF LEN(stringmathb$) > limit&& + lrc_decimalpoint& THEN stringmathb$ = "overflow"
END IF
END IF
IF betatest% THEN PRINT "Rounded: "; stringmathb$
EXIT SUB
string_rounding_method:
IF INSTR(stringmathb$, ".") THEN lrc_decimalpoint& = 1 ELSE lrc_decimalpoint& = 0
IF MID$(stringmathb$, LEN(stringmathb$), 1) > "4" THEN
FOR round_i& = LEN(stringmathb$) - 1 TO 1 STEP -1
round_x$ = CHR$(ASC(MID$(stringmathb$, round_i&, 1)) + 1)
IF round_x$ <> CHR$(47) THEN ' Decimal point + 1. Ignore.
IF round_x$ = CHR$(58) THEN
MID$(stringmathb$, round_i&, 1) = "0": carry$ = "1"
ELSE
MID$(stringmathb$, round_i&, 1) = round_x$: carry$ = "": EXIT FOR
END IF
END IF
NEXT
stringmathb$ = carry$ + MID$(stringmathb$, 1, LEN(stringmathb$) - 1): carry$ = ""
IF show_rounding% THEN stringmathround$ = "R"
ELSE
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
IF show_rounding% THEN stringmathround$ = "r"
END IF
IF lrc_decimalpoint& THEN
DO UNTIL RIGHT$(stringmathb$, 1) <> "0"
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
IF stringmathb$ = "" OR stringmathb$ = "." THEN stringmathb$ = "0": lrc_decimalpoint& = 0
IF RIGHT$(stringmathb$, 1) = "." AND exponentvalue&& = 0 THEN
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1): lrc_decimalpoint& = 0
END IF
END IF
RETURN
END SUB
SUB repetend_id (decimal$, repetend$, repetend_pattern$, repetend_class$, display_as$, z$, mp%)
x$ = MID$(decimal$, INSTR(decimal$, ".") + 1)
i = 1: j = 0: k = 0: repetend_class$ = ""
DO
j = j + 1: k = k + 1
z$ = MID$(x$, i, j)
mp% = INSTR(LEN(z$) + i, x$, z$)
IF betatest% < -1 THEN COLOR 2, 0: PRINT z$, "i ="; i; "Len ="; LEN(z$); "Prog ="; i + LEN(z$); "mp% ="; mp%; "case ="; p: COLOR 7, 0 '': SLEEP
IF VAL(z$) AND mp% = LEN(z$) + i THEN
FOR k = 0 TO LEN(MID$(x$, i)) / LEN(z$) - 1
IF MID$(x$, i + k * LEN(z$), LEN(z$)) <> z$ THEN mp% = -1: EXIT FOR
NEXT
IF mp% > 0 THEN
SELECT CASE LEN(z$)
CASE 1
IF i = 1 THEN
repetend_pattern$ = "Repetend infinite."
repetend$ = STRING$(3, z$)
repetend_class$ = "single"
display_as$ = MID$(decimal$, 1, LEN(z$) + j + INSTR(decimal$, ".") - j) + "..."
ELSE
repetend_pattern$ = "Repetend eventually infinite."
repetend$ = STRING$(3, z$)
repetend_class$ = "single"
IF LEFT$(decimal$, 1) = "-" THEN j = 2 ELSE j = 1
display_as$ = MID$(decimal$, 1, mp% - 1 + j + INSTR(decimal$, ".") - j - 1) + "(" + STRING$(1, z$) + ")"
END IF
CASE ELSE
repetend_pattern$ = "Repetend length = " + LTRIM$(STR$(LEN(z$)))
repetend$ = z$
repetend_class$ = "mixed"
IF LEFT$(decimal$, 1) = "-" THEN j = 2 ELSE j = 1
display_as$ = MID$(decimal$, 1, LEN(z$) + j + INSTR(decimal$, ".") - j) + "..."
END SELECT
EXIT DO
END IF
END IF
IF LEN(z$) >= (LEN(x$) - i + 1) / 2 THEN
repetend_pattern$ = "Non-repetend."
repetend_class$ = "null"
repetend$ = ""
display_as$ = decimal$
EXIT DO
END IF
IF mp% = 0 THEN j = 0: i = i + 1
LOOP
IF betatest% THEN
COLOR 14, 0
PRINT "Decimal: "; decimal$
IF LEN(repetend$) THEN PRINT "Repetend: "; repetend$
PRINT "Repetend class: "; repetend_class$
PRINT repetend_pattern$
IF mp% > 0 THEN
PRINT "Repeats at decimal place:"; mp% - 1
PRINT "May be displayed as: "; display_as$
END IF
PRINT: COLOR 7, 0
END IF
END SUB
SUB repetend_to_decimal (decimal$)
CALL repetend_id(decimal$, repetend$, repetend_pattern$, repetend_class$, display_as$, z$, mp%)
SELECT CASE repetend_class$
CASE "null" ' Terminating decimal.
IF MID$(decimal$, 1, 1) = "-" THEN j = 3 ELSE j = 2 ' Look for negative sign.
x1$ = MID$(decimal$, 1, INSTR(decimal$, ".") - 1)
IF j = 3 THEN x1$ = MID$(x1$, 2)
x2$ = MID$(decimal$, INSTR(decimal$, ".") + 1)
denominator$ = "1" + STRING$(LEN(x2$), "0")
DO UNTIL LEFT$(x2$, 1) <> "0"
x2$ = MID$(x2$, 2) ' Strip off any leading zeros
LOOP
IF j = 2 THEN numerator$ = x1$ + x2$ ELSE numerator$ = "-" + x1$ + x2$
CASE "single"
' Infinite repeating of a single digit.
ii% = mp% - 1
stringmatha$ = "1" + STRING$(mp%, "0"): stringmathb$ = decimal$
operator$ = "*": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
j = INSTR(runningtotal$, ".")
IF j THEN
m1$ = MID$(runningtotal$, 1, INSTR(runningtotal$, ".") - 1)
ELSE
m1$ = runningtotal$
END IF
stringmatha$ = "1" + STRING$(mp% - 1, "0"): stringmathb$ = decimal$
operator$ = "*": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
m2$ = MID$(runningtotal$, 1, INSTR(runningtotal$, ".") - 1)
stringmatha$ = m1$: stringmathb$ = m2$
operator$ = "-": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
numerator$ = runningtotal$
stringmatha$ = "1" + STRING$(mp%, "0"): stringmathb$ = "1" + STRING$(mp% - 1, "0")
operator$ = "-": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
denominator$ = runningtotal$
CASE ELSE ' Mixed.
' Infinite repeating pattern of two or more digits.
numerator$ = MID$(z$, 1, mp% - 1)
DO UNTIL LEFT$(numerator$, 1) <> "0"
a$ = MID$(numerator$, 2) ' Strip off any leading zeros
LOOP
stringmatha$ = "1" + STRING$(mp% - 1, "0")
stringmathb$ = "1" + STRING$((mp% - 1) - LEN(z$), "0")
operator$ = "-": CALL string_math(stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
denominator$ = runningtotal$
END SELECT
z$ = ""
CALL greatest_common_factor(numerator$, denominator$, limit&&)
END SUB
SUB validate_string (stringmathb$)
DO ' Faux loop.
vsn_negcnt& = 0: vsn_poscnt& = 0: vsn_depresent& = 0: decimalcnt& = 0: vsn_numberpresent& = 0: vsn_zerospresent& = 0
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): sm_sign$ = "-" ELSE sm_sign$ = ""
IF LEFT$(stringmathb$, 1) = "+" THEN IF sm_sign$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 2) ELSE stringmathb$ = "invalid number": EXIT DO
IF INSTR(UCASE$(stringmathb$), "D") OR INSTR(UCASE$(stringmathb$), "E") THEN ' Evaluate for Scientific Notation.
FOR sm_i& = 1 TO LEN(stringmathb$)
validatenum$ = MID$(UCASE$(stringmathb$), sm_i&, 1)
SELECT CASE validatenum$
CASE "+"
IF vsn_depresent& THEN vsn_poscnt& = vsn_poscnt& + 1 ELSE stringmathb$ = "invalid number": EXIT DO
CASE "-"
IF vsn_depresent& THEN vsn_negcnt& = vsn_negcnt& + 1 ELSE stringmathb$ = "invalid number": EXIT DO
CASE "0" TO "9"
vsn_numberpresent& = -1
CASE "D", "E"
vsn_depresent& = vsn_depresent& + 1
IF decimalcnt& = 0 AND sm_i& <> 2 OR vsn_depresent& > 1 OR vsn_numberpresent& = 0 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& = 1 AND vsn_poscnt& >= 1 THEN vsn_numberpresent& = 0: EXIT FOR
vsn_numberpresent& = 0
MID$(stringmathb$, sm_i&, 1) = "e" ' Standardize
CASE "."
decimalcnt& = decimalcnt& + 1
IF sm_i& <> 2 THEN vsn_numberpresent& = 0: EXIT FOR
CASE ELSE
vsn_numberpresent& = 0: EXIT FOR
END SELECT
NEXT
IF decimalcnt& = 0 THEN stringmathb$ = MID$(stringmathb$, 1, 1) + "." + MID$(stringmathb$, 2) ' Standardize "."
IF vsn_numberpresent& = 0 OR vsn_negcnt& = 1 AND vsn_poscnt& = 1 OR decimalcnt& > 1 OR INSTR(stringmathb$, ".") <> 2 THEN stringmathb$ = "invalid number": EXIT DO
vsn_depresent& = INSTR(stringmathb$, "e")
sm_x$ = MID$(stringmathb$, vsn_depresent& + 1, 1) ' Standardize exponent "+" these two lines.
IF sm_x$ <> "+" AND sm_x$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 1, vsn_depresent&) + "+" + MID$(stringmathb$, vsn_depresent& + 1)
IF MID$(stringmathb$, vsn_depresent& + 2, 1) = "0" THEN
IF MID$(stringmathb$, vsn_depresent& + 3, 1) <> "" THEN stringmathb$ = "invalid number": EXIT DO ' No leading zeros allowed in exponent notation.
END IF
jjed& = INSTR(stringmathb$, "e") ' Get position of notation.
valexpside$ = MID$(stringmathb$, jjed&) ' These two lines break up into number and notation
stringmathb$ = MID$(stringmathb$, 1, jjed& - 1) ' stringmathb$ is +- single digit whole number, decimal point and decimal number. valexpside$ is notation, sign and exponent.
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Remove any trailing zeros for number. Example 1.0d3 or 1.0000d3, etc.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
IF VAL(MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1)) = 0 THEN
IF RIGHT$(stringmathb$, 1) = "." THEN
stringmathb$ = "0.e+0" ' Handles all types of zero entries.
ELSE
stringmathb$ = "invalid number": EXIT DO
END IF
EXIT DO
END IF
stringmathb$ = sm_sign$ + stringmathb$ + valexpside$
EXIT DO
ELSE
FOR sm_i& = 1 TO LEN(stringmathb$)
validatenum$ = MID$(stringmathb$, sm_i&, 1)
SELECT CASE validatenum$
CASE "."
decimalcnt& = decimalcnt& + 1
CASE "0"
vsn_zerospresent& = -1
CASE "1" TO "9"
vsn_numberpresent& = -1
CASE "$"
CASE ELSE
stringmathb$ = "invalid number": EXIT DO
END SELECT
NEXT
IF decimalcnt& > 1 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& >= 1 AND vsn_poscnt& >= 1 THEN
stringmathb$ = "invalid number": EXIT DO
END IF
REM IF INSTR(stringmathb$, "$") THEN GOSUB currency_validate
REM IF INSTR(stringmathb$, ",") THEN
REM GOSUB comma_validation
REM IF stringmathb$ = "invalid number" THEN exit do
REM GOSUB comma_removal
REM END IF
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
DO UNTIL LEFT$(stringmathb$, 1) <> "0" ' Strip off any leading zeros.
stringmathb$ = MID$(stringmathb$, 2)
LOOP
stringmathb$ = sm_sign$ + stringmathb$
IF INSTR(stringmathb$, ".") THEN
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Strip off any trailing zeros in a decimal.
stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
END IF
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
IF vsn_numberpresent& = 0 THEN
IF vsn_zerospresent& THEN
stringmathb$ = "0"
ELSE
stringmathb$ = "invalid number"
END IF
END IF
END IF
EXIT DO
LOOP
IF betatest% THEN
IF stringmathb$ = "invalid number" THEN
PRINT: PRINT "Invalid number."
ELSE
PRINT: PRINT "Valid number."
END IF
END IF
END SUB
SUB string_math (stringmatha$, operator$, stringmathb$, runningtotal$, limit&&)
SELECT CASE operator$
CASE "+", "-"
GOTO string_add_subtract
CASE "*"
GOTO string_multiply
CASE "/"
GOTO string_divide
CASE ELSE
PRINT "Error, no operator selected. operator$ = "; operator$
END SELECT
string_divide:
divsign% = 0: divremainder& = 0: divremainder$ = "": divplace& = 0: divplace2& = 0: quotient$ = "": divcarry& = 0
operationdivision% = -1
divbuffer& = LEN(stringmathb$) - LEN(stringmatha$)
IF divbuffer& < 0 THEN divbuffer& = 0
d2dividend$ = stringmatha$
d1divisor$ = stringmathb$
IF LEFT$(d1divisor$, 1) = "0" AND LEN(d1divisor$) = 1 THEN PRINT "Division by zero not allowed.": divsign% = 0: operationdivision% = 0: EXIT SUB
IF LEFT$(d1divisor$, 1) = "-" THEN divsign% = -1: d1divisor$ = MID$(d1divisor$, 2)
IF LEFT$(d2dividend$, 1) = "-" THEN
IF divsign% THEN
divsign% = 0
ELSE
divsign% = -1
END IF
d2dividend$ = MID$(d2dividend$, 2)
END IF
IF INSTR(d1divisor$, ".") <> 0 THEN
DO UNTIL RIGHT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 1, LEN(d1divisor$) - 1) ' Strip off trailing zeros
LOOP
divplace& = LEN(d1divisor$) - INSTR(d1divisor$, ".")
d1divisor$ = MID$(d1divisor$, 1, INSTR(d1divisor$, ".") - 1) + MID$(d1divisor$, INSTR(d1divisor$, ".") + 1) ' Strip off decimal point.
DO UNTIL LEFT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 2) ' Strip off leading zeros for divisors smaller than .1
LOOP
END IF
IF INSTR(d2dividend$, ".") <> 0 THEN
d2dividend$ = d2dividend$ + STRING$(divplace& - LEN(d2dividend$) - INSTR(d2dividend$, "."), "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace2& = INSTR(d2dividend$, ".")
DO UNTIL RIGHT$(d2dividend$, 1) <> "0"
d2dividend$ = MID$(d2dividend$, 1, LEN(d2dividend$) - 1) ' Strip off trailing zeros
LOOP
d2dividend$ = MID$(d2dividend$, 1, INSTR(d2dividend$, ".") - 1) + MID$(d2dividend$, INSTR(d2dividend$, ".") + 1) ' Strip off decimal point.
ELSE
d2dividend$ = d2dividend$ + STRING$(divplace&, "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace& = 0
END IF
DO
DO
divremainder& = divremainder& + 1: divremainder$ = divremainder$ + MID$(d2dividend$, divremainder&, 1)
IF MID$(d2dividend$, divremainder&, 1) = "" THEN
IF divremainder$ = STRING$(LEN(divremainder$), "0") AND LEN(quotient$) > LEN(d2dividend$) THEN divflag% = -1: EXIT DO
divcarry& = divcarry& + 1
IF divcarry& = 1 THEN divplace3& = divremainder& - 1
IF divcarry& > limit&& + 1 + divbuffer& THEN
divflag% = -2: EXIT DO
END IF
divremainder$ = divremainder$ + "0" ' No more digits to bring down.
END IF
IF LEN(divremainder$) > LEN(d1divisor$) OR LEN(divremainder$) = LEN(d1divisor$) AND divremainder$ >= d1divisor$ THEN EXIT DO
quotient$ = quotient$ + "0"
LOOP
IF divflag% THEN divflag% = 0: EXIT DO
FOR div_i% = 9 TO 1 STEP -1
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply
tempcutd$ = divremainder$ ' divremainder$ can be 00 or other leading zero values.
DO
IF LEN(tempcutd$) = 1 THEN EXIT DO
IF LEFT$(tempcutd$, 1) = "0" THEN
tempcutd$ = MID$(tempcutd$, 2)
ELSE
EXIT DO
END IF
LOOP
IF LEN(tempcutd$) > LEN(m_product$) OR LEN(tempcutd$) = LEN(m_product$) AND m_product$ <= tempcutd$ THEN EXIT FOR
NEXT
quotient$ = quotient$ + LTRIM$(STR$(div_i%))
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply
operator$ = "-"
stringmatha$ = divremainder$
stringmathb$ = m_product$
GOSUB string_add_subtract
divremainder$ = stringmatha$
operator$ = "/"
LOOP
IF divplace& = 0 AND divplace2& = 0 THEN divplace& = divplace3&
IF divplace2& THEN divplace& = divplace& + divplace2& - 1
IF quotient$ = "" THEN divplace& = 0 ' dividend is zero.
IF divplace& OR divplace2& THEN
quotient$ = MID$(quotient$, 1, divplace&) + "." + MID$(quotient$, divplace& + 1)
DO UNTIL RIGHT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off trailing zeros
LOOP
IF RIGHT$(quotient$, 1) = "." THEN quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off abandoned decimal.
END IF
DO UNTIL LEFT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 2) ' Strip off leading zeros
LOOP
IF quotient$ = "" THEN quotient$ = "0": divsign% = 0
operationdivision% = 0
stringmathb$ = quotient$: quotient$ = ""
IF stringmathb$ = "overflow" THEN divsign% = 0: operationdivision% = 0: EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF divsign% THEN runningtotal$ = "-" + runningtotal$
IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
operationdivision% = 0
EXIT SUB
string_multiply:
m_decimal_places& = 0: m_product$ = ""
fac1$ = stringmatha$: fac2$ = stringmathb$ ' Make numbers whole numbers and remove any - sign.
IF LEFT$(fac1$, 1) = "-" THEN fac1$ = MID$(fac1$, 2): m_sign% = -1
IF LEFT$(fac2$, 1) = "-" THEN fac2$ = MID$(fac2$, 2): IF m_sign% THEN m_sign% = 0 ELSE m_sign% = -1
IF INSTR(fac1$, ".") <> 0 THEN m_decimal_places& = LEN(fac1$) - INSTR(fac1$, "."): fac1$ = MID$(fac1$, 1, INSTR(fac1$, ".") - 1) + MID$(fac1$, INSTR(fac1$, ".") + 1)
IF INSTR(fac2$, ".") <> 0 THEN m_decimal_places& = m_decimal_places& + LEN(fac2$) - INSTR(fac2$, "."): fac2$ = MID$(fac2$, 1, INSTR(fac2$, ".") - 1) + MID$(fac2$, INSTR(fac2$, ".") + 1)
FOR m_i& = LEN(fac2$) TO 1 STEP -1 ' Multiply each charater top and bottom.
m_k& = m_l&
m_x2$ = MID$(fac2$, m_i&, 1)
FOR m_j& = LEN(fac1$) TO 1 STEP -1
m_x1$ = MID$(fac1$, m_j&, 1)
IF m_product$ <> "" THEN
m_add$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0")
m_t& = 0: m_xproduct$ = "": m_carry% = 0
DO ' Add multiplied characters together.
m_x3$ = MID$(m_add$, LEN(m_add$) - m_t&, 1)
m_x4$ = MID$(m_product$, LEN(m_product$) - m_t&, 1)
IF m_x3$ = "" AND m_x4$ = "" THEN
IF m_carry% THEN m_xproduct$ = "1" + m_xproduct$
EXIT DO
END IF
m_g% = VAL(m_x3$) + VAL(m_x4$) + m_carry%
IF m_g% >= 10 THEN m_g% = m_g% - 10: m_carry% = 1 ELSE m_carry% = 0
m_xproduct$ = LTRIM$(STR$(m_g%)) + m_xproduct$
m_t& = m_t& + 1
LOOP
m_product$ = m_xproduct$: m_xproduct$ = ""
ELSE
m_product$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0") ' First loop makes variable here.
END IF
m_k& = m_k& + 1 ' Adds trailing zeros multiplication
NEXT
m_l& = m_l& + 1 ' Used to reset value for m_k& adding one trailing zer for each loop.
NEXT
fac1$ = "": fac2$ = "": m_l& = 0: m_k& = 0: m_t& = 0
IF m_decimal_places& > LEN(m_product$) THEN m_product$ = STRING$(m_decimal_places& - LEN(m_product$), "0") + m_product$ ' Add any leading zeros to a decimal. Ex: .02 * .01 is factored as 002. It needs one leading zero before adding the decimal point, .0002.
IF m_decimal_places& AND m_product$ <> "0" THEN ' Replace any decimal point.
m_product$ = MID$(m_product$, 1, LEN(m_product$) - m_decimal_places&) + "." + MID$(m_product$, LEN(m_product$) - m_decimal_places& + 1)
END IF
DO UNTIL LEFT$(m_product$, 1) <> "0" ' Remove leading zeros.
m_product$ = MID$(m_product$, 2)
LOOP
IF m_decimal_places& THEN
DO UNTIL RIGHT$(m_product$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1)
LOOP
END IF
IF m_product$ = "" THEN m_product$ = "0": m_sign% = 0
IF RIGHT$(m_product$, 1) = "." THEN m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1) ' Remove decimal from the end of an integer total.
IF operationdivision% THEN m_sign% = 0: RETURN
stringmathb$ = m_product$: m_product$ = ""
IF stringmathb$ = "overflow" THEN EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF m_sign% THEN runningtotal$ = "-" + runningtotal$: m_sign% = 0
EXIT SUB
string_add_subtract:
IF INSTR(stringmatha$, ".") <> 0 THEN ' Evaluate sum for decimal fraction.
sumplace& = LEN(stringmatha$) - INSTR(stringmatha$, ".")
stringmatha$ = MID$(stringmatha$, 1, INSTR(stringmatha$, ".") - 1) + MID$(stringmatha$, INSTR(stringmatha$, ".") + 1) ' Strip out decimal
END IF
IF INSTR(stringmathb$, ".") <> 0 THEN ' Evaluate number for decimal fraction.
numplace& = LEN(stringmathb$) - INSTR(stringmathb$, ".")
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Strip out decimal
END IF
IF sumplace& > numplace& THEN addsubplace& = sumplace& ELSE addsubplace& = numplace&
IF sumplace& > addsubplace& THEN
stringmatha$ = stringmatha$ + STRING$(sumplace& - addsubplace&, "0")
ELSEIF addsubplace& > sumplace& THEN
stringmatha$ = stringmatha$ + STRING$(addsubplace& - sumplace&, "0")
END IF
IF numplace& > addsubplace& THEN
stringmathb$ = stringmathb$ + STRING$(numplace& - addsubplace&, "0")
ELSEIF addsubplace& > numplace& THEN
stringmathb$ = stringmathb$ + STRING$(addsubplace& - numplace&, "0")
END IF ' END Decimal evaluations.
IF LEFT$(stringmatha$, 1) = "-" THEN sign_input$ = "-" ELSE sign_input$ = "+"
IF LEFT$(stringmathb$, 1) = "-" THEN sign_total$ = "-" ELSE sign_total$ = "+"
addsubsign% = 0
SELECT CASE sign_input$ + operator$ + sign_total$
CASE "+++", "+--"
operator$ = "+"
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
CASE "++-", "+-+"
operator$ = "-"
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
GOSUB string_comp
IF gl% < 0 THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
CASE "---", "-++"
operator$ = "-"
IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
GOSUB string_comp
IF gl% < 0 THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
CASE "--+", "-+-"
operator$ = "+"
IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
addsubsign% = -1
END SELECT
IF LEN(stringmatha$) > LEN(stringmathb$) THEN
stringmathb$ = STRING$(LEN(stringmatha$) - LEN(stringmathb$), "0") + stringmathb$
ELSEIF LEN(stringmatha$) < LEN(stringmathb$) THEN
stringmatha$ = STRING$(LEN(stringmathb$) - LEN(stringmatha$), "0") + stringmatha$
END IF
addsubx1$ = ""
SELECT CASE operator$
CASE "+", "="
FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) + VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
IF addsubx1% > 9 THEN addsubx1% = addsubx1% - 10: addsubcarry% = 1 ELSE addsubcarry% = 0
addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
NEXT
IF addsubcarry% THEN addsubx1$ = "1" + addsubx1$: addsubcarry% = 0
GOSUB replace_decimal
CASE "-"
FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) - VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
IF addsubx1% < 0 THEN addsubx1% = addsubx1% + 10: addsubcarry% = -1 ELSE addsubcarry% = 0
addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
NEXT
IF addsubx1$ <> "" AND addsubx1$ <> STRING$(LEN(addsubx1$), "0") THEN GOSUB replace_decimal
DO UNTIL LEFT$(addsubx1$, 1) <> "0" ' Remove leading zeros.
addsubx1$ = MID$(addsubx1$, 2)
LOOP
IF addsubx1$ = "" THEN
addsubx1$ = "0": addsubsign% = 0
ELSE
IF addsubcarry% THEN addsubx1$ = "-" + addsubx1$: addsubcarry% = 0
END IF
END SELECT
IF addsubsign% THEN
IF LEFT$(addsubx1$, 1) = "-" THEN addsubx1$ = MID$(addsubx1$, 2) ELSE addsubx1$ = "-" + addsubx1$
END IF
stringmatha$ = addsubx1$: addsubx1$ = ""
IF operationdivision% THEN RETURN
stringmathb$ = stringmatha$: stringmatha$ = ""
IF LEFT$(stringmathb$, 1) = "-" THEN
stringmathb$ = MID$(stringmathb$, 2)
n2sign$ = "-"
ELSE
n2sign$ = ""
END IF
IF stringmathb$ = "overflow" THEN n2sign$ = "": EXIT SUB
runningtotal$ = n2sign$ + stringmathb$: n2sign$ = ""
EXIT SUB
replace_decimal:
IF addsubplace& THEN
addsubx1$ = STRING$(addsubplace& - LEN(addsubx1$), "0") + addsubx1$
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - addsubplace&) + "." + MID$(addsubx1$, LEN(addsubx1$) - addsubplace& + 1)
DO UNTIL RIGHT$(addsubx1$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1)
addsubplace& = addsubplace& - 1
LOOP
IF RIGHT$(addsubx1$, 1) = "." THEN addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1) ' Number is now an integer.
END IF
RETURN
string_comp:
DO
REM Remove trailing zeros after a decimal point.
IF INSTR(acomp$, ".") THEN
DO UNTIL RIGHT$(acomp$, 1) <> "0" AND RIGHT$(acomp$, 1) <> "." AND RIGHT$(acomp$, 1) <> "-"
acomp$ = MID$(acomp$, 1, LEN(acomp$) - 1)
LOOP
END IF
IF INSTR(bcomp$, ".") THEN
DO UNTIL RIGHT$(bcomp$, 1) <> "0" AND RIGHT$(bcomp$, 1) <> "." AND RIGHT$(bcomp$, 1) <> "-"
bcomp$ = MID$(bcomp$, 1, LEN(bcomp$) - 1)
LOOP
END IF
IF MID$(acomp$, 1, 2) = "-0" OR acomp$ = "" OR acomp$ = "-" THEN acomp$ = "0"
IF MID$(bcomp$, 1, 2) = "-0" OR bcomp$ = "" OR bcomp$ = "-" THEN bcomp$ = "0"
' A - and +
IF LEFT$(acomp$, 1) = "-" THEN j% = -1
IF LEFT$(bcomp$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(acomp$, ".")
k% = INSTR(bcomp$, ".")
IF j% = 0 AND k% THEN
IF acomp$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF bcomp$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF acomp$ > bcomp$ THEN
gl% = 1
ELSEIF acomp$ = bcomp$ THEN gl% = 0
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(acomp$)
CASE IS < LEN(bcomp$)
gl% = -1
CASE IS = LEN(bcomp$)
IF acomp$ = bcomp$ THEN
gl% = 0
ELSEIF acomp$ > bcomp$ THEN gl% = 1
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
CASE IS > LEN(bcomp$)
gl% = 1
END SELECT
EXIT DO
LOOP
RETURN
END SUB
Pete
Posts: 714
Threads: 36
Joined: May 2022
Reputation:
13
Well, none of the local experts noticed that the result in Visual Basic was wrong? 
That is corrext:
Code: (Select All) Private Sub cmdCommand_Click()
Dim Zahl1, Zahl2, Ergebnis As Double
'Die Zahlen müssen einzeln aus den Textfeldern gelesen werden
'Das "Ergebnis = Val(txtZahl1.Text + txtZahl2.Text)" geht nicht
Zahl1 = Val(txtZahl1.Text)
Zahl2 = Val(txtZahl2.Text)
Ergebnis = Zahl1 + Zahl2
txtErgebnis.Text = Format$(Ergebnis, "###.##") 'Punkt! Englische Version.
End Sub
![[Image: Runden-Prog-Fehler2022-08-12-225439.jpg]](https://i.ibb.co/Fz8FXbn/Runden-Prog-Fehler2022-08-12-225439.jpg)
Give me a gun! 
|
