Don't make me REPETEND myself...
#3
I hope you have it handy.

I just tweaked what I have just a bit. The original works, but I fudged it a bit. Right now, 1 / 6 = .1666 (6s repeat) and 1 / 7 = .142857... So I made the algorithm look past the first digit so it would see .666... and .428571... That would be fine for detecting the pattern further into the decimal, well, fine until you wanted to assign a variable to show the repetend.

So...

Code: (Select All)
WIDTH 170, 42
_SCREENMOVE 0, 0
DO
    DIM SHARED runningtotal$, limit&&
    limit&& = 200

    LINE INPUT "Numerator: "; a$
    LINE INPUT "Denominator: "; b$

    calcdiv a$, b$

    COLOR 14, 0: PRINT runningtotal$; "  ";: COLOR 7, 0

    IF INSTR(runningtotal$, ".") THEN
        x$ = MID$(runningtotal$, INSTR(runningtotal$, ".") + 1)
        x$ = MID$(x$, LEN(b$) - LEN(a$))

        FOR i = 1 TO LEN(x$)
            k = j
            j = INSTR(i + 1, x$, MID$(x$, 1, i))
            IF j = k THEN EXIT FOR
        NEXT

        SELECT CASE j
            CASE 0
                IF LEN(x$) >= limit&& AND INSTR(runningtotal$, STRING$(limit&&, MID$(x$, LEN(x$), 1))) THEN
                    IF x$ <> STRING$(LEN(x$), MID$(x$, 1, 1)) THEN
                        msg$ = "Eventual infinite repetend."
                        repetend$ = STRING$(3, MID$(x$, LEN(x$), 1))
                    ELSE
                        msg$ = "Repetend infinite."
                        repetend$ = STRING$(3, MID$(x$, LEN(x$), 1))
                    END IF
                ELSE
                    j = -1: msg$ = "Non-repetend."
                END IF
            CASE ELSE
                msg$ = "Repetend length = " + LTRIM$(STR$(j - 1))
                repetend$ = MID$(x$, 1, j - 1)
        END SELECT
    ELSE
        j = -1: msg$ = "Non-decimal"
    END IF

    PRINT msg$; "  ";
    COLOR 3, 0
    PRINT repetend$;: IF j = 0 THEN PRINT "..." ELSE PRINT
    COLOR 7, 0
    CLEAR
    PRINT
LOOP

SUB calcdiv (a$, b$)
    stringmatha$ = a$
    stringmathb$ = b$

    operationdivision% = -1
    divbuffer& = LEN(stringmathb$) - LEN(stringmatha$)
    IF divbuffer& < 0 THEN divbuffer& = 0
    d2dividend$ = stringmatha$
    d1divisor$ = stringmathb$
    IF LEFT$(d1divisor$, 1) = "0" AND LEN(d1divisor$) = 1 THEN PRINT "Division by zero not allowed.": EXIT SUB
    IF LEFT$(d1divisor$, 1) = "-" THEN divsign% = -1: d1divisor$ = MID$(d1divisor$, 2)
    IF LEFT$(d2dividend$, 1) = "-" THEN
        IF divsign% THEN
            divsign% = 0
        ELSE
            divsign% = -1
        END IF
        d2dividend$ = MID$(d2dividend$, 2)
    END IF
    IF INSTR(d1divisor$, ".") <> 0 THEN
        DO UNTIL RIGHT$(d1divisor$, 1) <> "0"
            d1divisor$ = MID$(d1divisor$, 1, LEN(d1divisor$) - 1) ' Strip off trailing zeros
        LOOP
        divplace& = LEN(d1divisor$) - INSTR(d1divisor$, ".")
        d1divisor$ = MID$(d1divisor$, 1, INSTR(d1divisor$, ".") - 1) + MID$(d1divisor$, INSTR(d1divisor$, ".") + 1) ' Strip off decimal point.
        DO UNTIL LEFT$(d1divisor$, 1) <> "0"
            d1divisor$ = MID$(d1divisor$, 2) ' Strip off leading zeros for divisors smaller than .1
        LOOP
    END IF

    IF INSTR(d2dividend$, ".") <> 0 THEN
        d2dividend$ = d2dividend$ + STRING$(divplace& - LEN(d2dividend$) - INSTR(d2dividend$, "."), "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
        divplace2& = INSTR(d2dividend$, ".")
        DO UNTIL RIGHT$(d2dividend$, 1) <> "0"
            d2dividend$ = MID$(d2dividend$, 1, LEN(d2dividend$) - 1) ' Strip off trailing zeros
        LOOP
        d2dividend$ = MID$(d2dividend$, 1, INSTR(d2dividend$, ".") - 1) + MID$(d2dividend$, INSTR(d2dividend$, ".") + 1) ' Strip off decimal point.
    ELSE
        d2dividend$ = d2dividend$ + STRING$(divplace&, "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
        divplace& = 0
    END IF
    DO
        DO
            divremainder& = divremainder& + 1: divremainder$ = divremainder$ + MID$(d2dividend$, divremainder&, 1)
            IF MID$(d2dividend$, divremainder&, 1) = "" THEN
                IF divremainder$ = STRING$(LEN(divremainder$), "0") AND LEN(quotient$) > LEN(d2dividend$) THEN divflag% = -1: EXIT DO
                divcarry& = divcarry& + 1
                IF divcarry& = 1 THEN divplace3& = divremainder& - 1
                IF divcarry& > limit&& + 1 + divbuffer& THEN
                    divflag% = -2: EXIT DO
                END IF
                divremainder$ = divremainder$ + "0" ' No more digits to bring down.
            END IF
            IF LEN(divremainder$) > LEN(d1divisor$) OR LEN(divremainder$) = LEN(d1divisor$) AND divremainder$ >= d1divisor$ THEN EXIT DO
            quotient$ = quotient$ + "0"
        LOOP
        IF divflag% THEN divflag% = 0: EXIT DO
        FOR div_i% = 9 TO 1 STEP -1
            stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
            m_product$ = "": GOSUB string_multiply
            tempcutd$ = divremainder$ ' divremainder$ can be 00 or other leading zero values.
            DO
                IF LEN(tempcutd$) = 1 THEN EXIT DO
                IF LEFT$(tempcutd$, 1) = "0" THEN
                    tempcutd$ = MID$(tempcutd$, 2)
                ELSE
                    EXIT DO
                END IF
            LOOP
            IF LEN(tempcutd$) > LEN(m_product$) OR LEN(tempcutd$) = LEN(m_product$) AND m_product$ <= tempcutd$ THEN EXIT FOR
        NEXT
        quotient$ = quotient$ + LTRIM$(STR$(div_i%))
        stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
        m_product$ = "": GOSUB string_multiply
        operator$ = "-"
        stringmatha$ = divremainder$
        stringmathb$ = m_product$
        GOSUB string_add_subtract
        divremainder$ = stringmatha$
        operator$ = "/"
    LOOP
    IF divplace& = 0 AND divplace2& = 0 THEN divplace& = divplace3&
    IF divplace2& THEN divplace& = divplace& + divplace2& - 1
    IF quotient$ = "" THEN divplace& = 0 ' dividend is zero.
    IF divplace& OR divplace2& THEN
        quotient$ = MID$(quotient$, 1, divplace&) + "." + MID$(quotient$, divplace& + 1)
        DO UNTIL RIGHT$(quotient$, 1) <> "0"
            quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off trailing zeros
        LOOP
        IF RIGHT$(quotient$, 1) = "." THEN quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off abandoned decimal.
    END IF
    DO UNTIL LEFT$(quotient$, 1) <> "0"
        quotient$ = MID$(quotient$, 2) ' Strip off leading zeros
    LOOP
    IF quotient$ = "" THEN quotient$ = "0": divsign% = 0
    operationdivision% = 0
    stringmathb$ = quotient$: quotient$ = ""
    '''GOSUB limit_round_convert
    IF stringmathb$ = "overflow" THEN divsign% = 0: EXIT SUB
    '''GOSUB sm_converter
    runningtotal$ = stringmathb$: stringmathb$ = ""
    IF divsign% THEN runningtotal$ = "-" + runningtotal$

    IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
    EXIT SUB

    string_multiply:
    fac1$ = stringmatha$: fac2$ = stringmathb$ ' Make numbers whole numbers and remove any - sign.
    IF LEFT$(fac1$, 1) = "-" THEN fac1$ = MID$(fac1$, 2): m_sign% = -1
    IF LEFT$(fac2$, 1) = "-" THEN fac2$ = MID$(fac2$, 2): IF m_sign% THEN m_sign% = 0 ELSE m_sign% = -1
    IF INSTR(fac1$, ".") <> 0 THEN m_decimal_places& = LEN(fac1$) - INSTR(fac1$, "."): fac1$ = MID$(fac1$, 1, INSTR(fac1$, ".") - 1) + MID$(fac1$, INSTR(fac1$, ".") + 1)
    IF INSTR(fac2$, ".") <> 0 THEN m_decimal_places& = m_decimal_places& + LEN(fac2$) - INSTR(fac2$, "."): fac2$ = MID$(fac2$, 1, INSTR(fac2$, ".") - 1) + MID$(fac2$, INSTR(fac2$, ".") + 1)
    FOR m_i& = LEN(fac2$) TO 1 STEP -1 ' Multiply each charter top and bottom.
        m_k& = m_l&
        m_x2$ = MID$(fac2$, m_i&, 1)
        FOR m_j& = LEN(fac1$) TO 1 STEP -1
            m_x1$ = MID$(fac1$, m_j&, 1)
            IF m_product$ <> "" THEN
                m_add$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0")
                m_t& = 0: m_xproduct$ = "": m_carry% = 0
                DO ' Add multiplied characters together.
                    m_x3$ = MID$(m_add$, LEN(m_add$) - m_t&, 1)
                    m_x4$ = MID$(m_product$, LEN(m_product$) - m_t&, 1)
                    IF m_x3$ = "" AND m_x4$ = "" THEN
                        IF m_carry% THEN m_xproduct$ = "1" + m_xproduct$
                        EXIT DO
                    END IF
                    m_g% = VAL(m_x3$) + VAL(m_x4$) + m_carry%
                    IF m_g% >= 10 THEN m_g% = m_g% - 10: m_carry% = 1 ELSE m_carry% = 0
                    m_xproduct$ = LTRIM$(STR$(m_g%)) + m_xproduct$
                    m_t& = m_t& + 1
                LOOP
                m_product$ = m_xproduct$: m_xproduct$ = ""
            ELSE
                m_product$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0") ' First loop makes variable here.
            END IF
            m_k& = m_k& + 1 ' Adds trailing zeros multiplication
        NEXT
        m_l& = m_l& + 1 ' Used to reset value for m_k& adding one trailing zer for each loop.
    NEXT
    fac1$ = "": fac2$ = "": m_l& = 0: m_k& = 0: m_t& = 0
    IF m_decimal_places& > LEN(m_product$) THEN m_product$ = STRING$(m_decimal_places& - LEN(m_product$), "0") + m_product$ ' Add any leading zeros to a decimal. Ex: .02 * .01 is factored as 002. It needs one leading zero before adding the decimal point, .0002.
    IF m_decimal_places& AND m_product$ <> "0" THEN ' Replace any decimal point.
        m_product$ = MID$(m_product$, 1, LEN(m_product$) - m_decimal_places&) + "." + MID$(m_product$, LEN(m_product$) - m_decimal_places& + 1)
    END IF
    DO UNTIL LEFT$(m_product$, 1) <> "0" ' Remove leading zeros.
        m_product$ = MID$(m_product$, 2)
    LOOP
    IF m_decimal_places& THEN
        DO UNTIL RIGHT$(m_product$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
            m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1)
        LOOP
    END IF
    IF m_product$ = "" THEN m_product$ = "0": m_sign% = 0
    IF RIGHT$(m_product$, 1) = "." THEN m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1) ' Remove decimal from the end of an integer total.
    IF operationdivision% THEN m_sign% = 0: RETURN
    stringmathb$ = m_product$: m_product$ = ""
    '''GOSUB limit_round_convert
    IF stringmathb$ = "overflow" THEN EXIT SUB
    '''GOSUB sm_converter
    runningtotal$ = stringmathb$: stringmathb$ = ""
    IF m_sign% THEN runningtotal$ = "-" + runningtotal$: m_sign% = 0
    RETURN

    string_add_subtract:
    IF INSTR(stringmatha$, ".") <> 0 THEN ' Evaluate sum for decimal fraction.
        sumplace& = LEN(stringmatha$) - INSTR(stringmatha$, ".")
        stringmatha$ = MID$(stringmatha$, 1, INSTR(stringmatha$, ".") - 1) + MID$(stringmatha$, INSTR(stringmatha$, ".") + 1) ' Strip out decimal
    END IF
    IF INSTR(stringmathb$, ".") <> 0 THEN ' Evaluate number for decimal fraction.
        numplace& = LEN(stringmathb$) - INSTR(stringmathb$, ".")
        stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Strip out decimal
    END IF
    IF sumplace& > numplace& THEN addsubplace& = sumplace& ELSE addsubplace& = numplace&
    IF sumplace& > addsubplace& THEN
        stringmatha$ = stringmatha$ + STRING$(sumplace& - addsubplace&, "0")
    ELSEIF addsubplace& > sumplace& THEN
        stringmatha$ = stringmatha$ + STRING$(addsubplace& - sumplace&, "0")
    END IF
    IF numplace& > addsubplace& THEN
        stringmathb$ = stringmathb$ + STRING$(numplace& - addsubplace&, "0")
    ELSEIF addsubplace& > numplace& THEN
        stringmathb$ = stringmathb$ + STRING$(addsubplace& - numplace&, "0")
    END IF ' END Decimal evaluations.

    IF LEFT$(stringmatha$, 1) = "-" THEN sign_input$ = "-" ELSE sign_input$ = "+"
    IF LEFT$(stringmathb$, 1) = "-" THEN sign_total$ = "-" ELSE sign_total$ = "+"

    addsubsign% = 0
    SELECT CASE sign_input$ + operator$ + sign_total$
        CASE "+++", "+--"
            operator$ = "+"
            IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
        CASE "++-", "+-+"
            operator$ = "-"
            IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
            IF VAL(stringmathb$) > VAL(stringmatha$) THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
        CASE "---", "-++"
            operator$ = "-"
            IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
            IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
            IF VAL(stringmathb$) > VAL(stringmatha$) THEN SWAP stringmatha$, stringmathb$ ELSE addsubsign% = -1
        CASE "--+", "-+-"
            operator$ = "+"
            IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
            IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
            addsubsign% = -1
    END SELECT

    IF LEN(stringmatha$) > LEN(stringmathb$) THEN
        stringmathb$ = STRING$(LEN(stringmatha$) - LEN(stringmathb$), "0") + stringmathb$
    ELSEIF LEN(stringmatha$) < LEN(stringmathb$) THEN
        stringmatha$ = STRING$(LEN(stringmathb$) - LEN(stringmatha$), "0") + stringmatha$
    END IF
    addsubx1$ = ""

    SELECT CASE operator$
        CASE "+", "="
            FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
                addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) + VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
                IF addsubx1% > 9 THEN addsubx1% = addsubx1% - 10: addsubcarry% = 1 ELSE addsubcarry% = 0
                addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
            NEXT
            IF addsubcarry% THEN addsubx1$ = "1" + addsubx1$: addsubcarry% = 0
            GOSUB replace_decimal
        CASE "-"
            FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
                addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) - VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
                IF addsubx1% < 0 THEN addsubx1% = addsubx1% + 10: addsubcarry% = -1 ELSE addsubcarry% = 0
                addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
            NEXT
            IF addsubx1$ <> "" AND addsubx1$ <> STRING$(LEN(addsubx1$), "0") THEN GOSUB replace_decimal
            DO UNTIL LEFT$(addsubx1$, 1) <> "0" ' Remove leading zeros.
                addsubx1$ = MID$(addsubx1$, 2)
            LOOP
            IF addsubx1$ = "" THEN
                addsubx1$ = "0": addsubsign% = 0
            ELSE
                IF addsubcarry% THEN addsubx1$ = "-" + addsubx1$: addsubcarry% = 0
            END IF
    END SELECT

    IF addsubsign% THEN
        IF LEFT$(addsubx1$, 1) = "-" THEN addsubx1$ = MID$(addsubx1$, 2) ELSE addsubx1$ = "-" + addsubx1$
    END IF
    stringmatha$ = addsubx1$: addsubx1$ = ""
    IF operationdivision% THEN RETURN
    stringmathb$ = stringmatha$: stringmatha$ = ""
    IF LEFT$(stringmathb$, 1) = "-" THEN
        stringmathb$ = MID$(stringmathb$, 2)
        n2sign$ = "-"
    ELSE
        n2sign$ = ""
    END IF
    ''' GOSUB limit_round_convert
    IF stringmathb$ = "overflow" THEN n2sign$ = "": EXIT SUB
    ''' GOSUB sm_converter
    runningtotal$ = n2sign$ + stringmathb$: n2sign$ = ""
    RETURN

    replace_decimal:
    IF addsubplace& THEN
        addsubx1$ = STRING$(addsubplace& - LEN(addsubx1$), "0") + addsubx1$
        addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - addsubplace&) + "." + MID$(addsubx1$, LEN(addsubx1$) - addsubplace& + 1)
        DO UNTIL RIGHT$(addsubx1$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
            addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1)
            addsubplace& = addsubplace& - 1
        LOOP
        IF RIGHT$(addsubx1$, 1) = "." THEN addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1) ' Number is now an integer.
    END IF
    RETURN

END SUB

Pete
If eggs are brain food, Biden takes his scrambled.
Reply


Messages In This Thread
Don't make me REPETEND myself... - by Pete - 07-31-2022, 08:57 PM
RE: Don't make me REPETEND myself... - by bplus - 07-31-2022, 11:20 PM
RE: Don't make me REPETEND myself... - by Pete - 08-01-2022, 01:00 AM
RE: Don't make me REPETEND myself... - by bplus - 08-01-2022, 03:57 PM
RE: Don't make me REPETEND myself... - by Pete - 08-01-2022, 07:10 PM
RE: Don't make me REPETEND myself... - by Jack - 08-01-2022, 07:47 PM
RE: Don't make me REPETEND myself... - by Pete - 08-03-2022, 12:30 AM
RE: Don't make me REPETEND myself... - by Jack - 08-03-2022, 01:39 AM
RE: Don't make me REPETEND myself... - by Pete - 08-03-2022, 02:49 AM
RE: Don't make me REPETEND myself... - by Stuart - 08-03-2022, 08:21 AM
RE: Don't make me REPETEND myself... - by Dav - 08-03-2022, 10:37 AM
RE: Don't make me REPETEND myself... - by Pete - 08-03-2022, 05:39 PM
RE: Don't make me REPETEND myself... - by Pete - 08-03-2022, 06:48 PM
RE: Don't make me REPETEND myself... - by Pete - 08-03-2022, 10:43 PM
RE: Don't make me REPETEND myself... - by Stuart - 08-04-2022, 07:13 AM
RE: Don't make me REPETEND myself... - by Pete - 08-04-2022, 08:37 AM
RE: Don't make me REPETEND myself... - by Jack - 08-04-2022, 09:23 AM
RE: Don't make me REPETEND myself... - by Stuart - 08-04-2022, 10:30 AM
RE: Don't make me REPETEND myself... - by bplus - 08-04-2022, 01:26 PM
RE: Don't make me REPETEND myself... - by Pete - 08-04-2022, 06:30 PM
RE: Don't make me REPETEND myself... - by Pete - 08-04-2022, 09:17 PM
RE: Don't make me REPETEND myself... - by Jack - 08-04-2022, 10:37 PM
RE: Don't make me REPETEND myself... - by Pete - 08-05-2022, 10:05 AM
RE: Don't make me REPETEND myself... - by Pete - 08-14-2022, 11:48 AM



Users browsing this thread: 9 Guest(s)